Specifications

52
Navigation
Traffic safety
The device has been produced for use in trucks.
During route calculation the navigation system takes into account e.g. height
limits or maximum permissible road load required to guide the truck. However,
this assumes that the corresponding information is stored in the navigation data.
 Be constantly aware of all restrictions in street traffic while driving, even if
you are following the driving recommendations from the device. It is
possible that the information stored in the navigation data is incorrect,
incomplete or out-of-date.
 Use only up-to-date SD cards with maps that contain information relevant
to trucks for an update of navigation data.
 Make sure your vehicle specifics and the current load are always stored in
full in the device in order to avoid inappropriate or hazardous route outlines
being calculated.
General Information
The system will guide you reliably to your destination, even if you cannot find your
own way in the area. The system receives traffic messages in the current reception
area via RDS-TMC. With dynamic navigation the system uses traffic information in
the area for route calculation.
Traffic safety
Using the navigation system does not relieve you as a driver from your
responsibility for a correct driving style in traffic. The road traffic regulations in
force must always be followed. If the navigation instructions contravene the
road traffic reg
ulations then the road traffic regulations always apply in the first
instance.
Note
RDS-TMC is not available in all countries.
Navigation system functions
Vehicle position and movement are registered using sensors. The distance travelled