Specifications

69
Note
 Tap on Info to repeat the last voice command.
 Touch Info for a few seconds in order to activate or deactivate the
voice guidance.
User-defined points of interest (POI)
In addition to the points of interest (POIs) that are stored on the SD card, you can
define your own POIs. The POIs you create can be downloaded into the system.
You can create the following:
 Waypoints
 Warnings for POIs
Own POIs:
The POIs can be used as destinations for the navigation system. Make sure you
define the GPS coordinates (longitude and latitude) for each waypoint and then use a
descriptive name for it. Once you have downloaded the POI data to the system, look
in the menu for the user-defined POIs for a name (e.g. ”David’s place”) that can be
used as a destination during navigation.
Proceed as follows in order to create POIs:
Note
You must create a separate ASCII-encoded text file in a simple word
processor for each type of POI.
 Create a text file with any name and the file extension .asc
(e.g. ”SamsWaypoints.asc”).
 Enter the following information about the destination in the text file:
 Coordinate for longitude
 Coordinate for latitude
 Name of the waypoint
(e.g. 9.9800000,52.0150000, ”David’s place”)
Note
 This information must be entered on a single line.
 You can find the GPS coordinates you need in e.g. a topographic map.
 The GPS coordinates must be specified in degrees with decimal places.
 The coordinates of west longitude and south latitude must be entered with
a minus sign ”-” before them.