Specifications

77
Problem
Reason
Action
Apparatus temperature too high;
e.g. if the sun is shining and
makes it very hot in the cab. The
message ”No int. CD” is shown.
When the device is within the
possible operating temperature the
CD drive is reactivated.
If playback of a self-burned CD
disc stops or if the sound skips
then it may be due to the following
reasons:
 The writable CD disc is not
accepted.
 The CD disc is produced in a
format that makes it difficult to
read (e.g. bit rate too high).
The radio system may not
necessarily be faulty even if the
CD disc plays back correctly in the
music system at home. The music
system is not exposed to any
major mechanical stress, which is
the case in a vehicle (e.g.
vibration, high temperature).
Follow the recommendations in the
chapter ”Preparing an MP3 CD” if
you want to burn your own CD.
NAVIGATION
Navigation does not
start
The SD card with maps is
damaged or dirty. This leads to
read error in the device.
Clean the SD card and protect it
from damage.
Route guidance is
incorrect
Either you are on a new road or
the stretch of road has changed
but is not yet included on the SD
card with maps.
Use a map to find your way or
continue driving along the current
route
if possible. Navigation is resumed
as soon as you drive on a road
that is on the SD card.
Check whether there are any
newer SD cards if you drive
frequently in the current area.