Specifications

9
Important information!
Do not adjust settings or input information into the navigation system while the
truck is in motion. Stop before you enter a new destination or change system
settings! The navigation equipment must be used in a way that does not put
you and other road users in danger. Traffic safety must always come first. The
risk of serious accident is great if you neglect to keep your full attention on the
traffic situation.
The route outline with the route guidance that the navigation equipment
calculates is a suggestion. You must always demonstrate good driving
behaviour and give your full attention to the current traffic situation. Signs,
temporary directions and other regulations always take priority over route
guidance from the navigation system.
If you are using vehicle-specific navigation (Truck Navigation), make sure that
you are aware of the applicable conditions for the route outline that the
navigation system has suggested. This applies, for example, to the bearing
capacity of roads or bridges, local regulations, etc.
 Familiarise yourself will all functions before you begin driving.
 Only use the Scania Radio Premium and other functions when traffic
situations permit.
 The navigation system provides route guidance during navigation. Follow
them only on condition that you do not break any traffic rules!
 The Scania navigation system has been designed for use in trucks.
 Adjust the volume to the current traffic situation. You must be able to hear
sounds from emergency vehicles clearly and in good time.
The Scania navigation system has been designed for use in trucks.
When calculating the route outline you can instruct the navigator to take into
account height limits or maximum permissible axle weights on the heaviest
axle which are required in order to navigate a truck to the destination, to the
extent they are stored on the SD card. In the manual this is called navigation
with the truck’s specifics.
 While driving, always be observant of road traffic restrictions, even when
you are following the recommendations provided by Scania in the manual.
The information saved on the SD card may not be complete or up-to-date.
 Only use original Scania SD cards in conjunction with the Scania Radio
Premium.
 Make sure that your vehicle specifics and current load are always input in
full into the navigation system to prevent the system from recommending
unsuitable or hazardous route outlines.