User Manual
Table Of Contents
- CAN interface for bodywork
- Introduction
- Summary of CAN messages
- Detailed description of CAN messages
- Explanation
- CAN messages sent to the vehicle
- CAN messages sent from the vehicle
- Software identification
- Scania bodywork status message 1
- Air Supply Pressure
- Air Suspension Control 1
- Alarm Status Proprietary
- Ambient Conditions
- BAM-E
- Cab Illumination Message
- Cab Information Proprietary 1
- Cruise Control/Vehicle Speed
- Crash Occured
- Coordinator General Information
- Coordinator General Information 2
- CUV information
- Dash Display
- DLN2-Proprietary
- DLN5-Proprietary
- DLN8-Proprietary
- DM1
- EAC1-K
- EBC1
- EBC2 Wheel Speed Proprietary
- EBC4 Wheel Brake Lining Remaining Information
- EBC5
- EEC1
- EEC2
- Engine Configuration Messages
- Engine Fluid Level/Pressure 1
- Engine Hours, Revolutions
- Engine Temperature
- ERC1-RD
- ETC1 - T
- ETC1 - CV
- ETC2
- ETC7
- Fuel Consumption
- Fuel Economy
- High Resolution Vehicle Distance
- Inlet/Exhaust Conditions
- PTO information Proprietary
- Retarder Fluids
- Supply Pressure
- TCO1
- Time/Date
- Transmisson Control 1 (TC1)
- Transmission Fluids
- Transmission Proprietary/DLN5
- Transmission Proprietary 2 - T
- Transmission Proprietary 2 - AWD
- Vehicle Weight
- Vehicle Weight
- Requirements for CAN communication with the vehicle
©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Summary of CAN messages
11:90-01 Issue 1 en-GB 11 (139)
The following CAN messages can be sent by vehicles manufactured from September
2008 onwards:
Message to vehicle Identifier (Hex) Source address Specification Remarks
Air supply pressure 18 FE AE 30 APS SAE J1939-71
Air suspension control 1 0C FE 5A 27 COO SAE J1939-71
Cab information proprietary 1 18 FF 96 17 ICL Scania
Crash occurred 18 FF FD 64 CSS Scania
DLN5 18 FF A0 27 COO Scania
DLN8 18 FF 88 00 EMS Scania
EBC2 Wheel speed proprietary 0C FF 19 0B BMS Scania
EBC5 18 FD C4 0B BMS SAE J1939-71
ETC1 - CV 0C F0 02 43 GMS SAE J1939-71 ZF torque converter
Engine Configuration Messages 18 EC FF 00 EMS SAE J1939-71
Transmission Control 1 0C 01 FF 05 COO SAE J1939-71
Transmission Proprietary 2 - AWD 18 FF A1 04 AWD Scania AWD equipped
Transport Protocol - ConnectionManage-
ment
18 EC FF 00 EMS SAE J1939-71
Transport Protocol - Data Transfer 18 EB FF 00 EMS SAE J1939-71
Vehicle Weight - ICL 18 FE EA 17 ICL SAE J1939-71