User Manual

Table Of Contents
©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Detailed description of CAN messages
11:90-01 Issue 1 en-GB 127 (139)
Vehicle Weight
Identifier: 18 FE EA 2F
Transmission interval: 100 ms
Only sent from BWS if the air suspension system SMS is installed equipped with
pressure sensors in the bellows.
A: Indicates the axle to which the message refers, counted from the front of the ve-
hicle to the rear. The numbering starts at 0.
B: The weight on the road surface at the axle specified by Byte 1, Axle Location.
Byte Bit Length Explanation State Resolution Limits Note
118Axle location Bit-mapped A
Error FEh
Not available FFh
2116Axle weight 0.5 kg/bit 0 to 3 2127.5 kg B
Error FExxh
Not available FFxxh
4116Trailer weight 2 kg/bit 0 to 12 8510 kg
Error FExxh
Not available FFxxh
6116Cargo weight 2 kg/bit 0 to 12 8510 kg
Error FExxh
Not available FFxxh
8 Not defined