User Manual
Table Of Contents
- CAN interface for bodywork
- Introduction
- Summary of CAN messages
- Detailed description of CAN messages
- Explanation
- CAN messages sent to the vehicle
- CAN messages sent from the vehicle
- Software identification
- Scania bodywork status message 1
- Air Supply Pressure
- Air Suspension Control 1
- Alarm Status Proprietary
- Ambient Conditions
- BAM-E
- Cab Illumination Message
- Cab Information Proprietary 1
- Cruise Control/Vehicle Speed
- Crash Occured
- Coordinator General Information
- Coordinator General Information 2
- CUV information
- Dash Display
- DLN2-Proprietary
- DLN5-Proprietary
- DLN8-Proprietary
- DM1
- EAC1-K
- EBC1
- EBC2 Wheel Speed Proprietary
- EBC4 Wheel Brake Lining Remaining Information
- EBC5
- EEC1
- EEC2
- Engine Configuration Messages
- Engine Fluid Level/Pressure 1
- Engine Hours, Revolutions
- Engine Temperature
- ERC1-RD
- ETC1 - T
- ETC1 - CV
- ETC2
- ETC7
- Fuel Consumption
- Fuel Economy
- High Resolution Vehicle Distance
- Inlet/Exhaust Conditions
- PTO information Proprietary
- Retarder Fluids
- Supply Pressure
- TCO1
- Time/Date
- Transmisson Control 1 (TC1)
- Transmission Fluids
- Transmission Proprietary/DLN5
- Transmission Proprietary 2 - T
- Transmission Proprietary 2 - AWD
- Vehicle Weight
- Vehicle Weight
- Requirements for CAN communication with the vehicle
©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Detailed description of CAN messages
11:90-01 Issue 1 en-GB 13 (139)
CAN messages sent to the vehicle
Scania Bodywork Control Message 1
Identifier: 0C FF F8 XX
Transmission interval: 50 ms
Byte Bit Length Explanation State Resolution Limits Note
118Message configuration version 01h 0 to 250
212Engine control mode
Engine speed control disabled 00 C
Engine speed control 1 01
Engine speed control 2 10
Not available or not installed 11
3..4 Not defined
52Requested governor
Normal governor 00
Stiff governor 01
Error indicator 10
Not available or not installed 11
72Accelerator pedal disable
Accelerator pedal not disabled 00
Accelerator pedal disabled 01
Error indicator 10
Not available 11
316Requested engine speed 0.125 r/min 0 to 8 031.875 r/min B
Error indicator FExxh
Not available FExxh