User Manual
Table Of Contents
- CAN interface for bodywork
- Introduction
- Summary of CAN messages
- Detailed description of CAN messages
- Explanation
- CAN messages sent to the vehicle
- CAN messages sent from the vehicle
- Software identification
- Scania bodywork status message 1
- Air Supply Pressure
- Air Suspension Control 1
- Alarm Status Proprietary
- Ambient Conditions
- BAM-E
- Cab Illumination Message
- Cab Information Proprietary 1
- Cruise Control/Vehicle Speed
- Crash Occured
- Coordinator General Information
- Coordinator General Information 2
- CUV information
- Dash Display
- DLN2-Proprietary
- DLN5-Proprietary
- DLN8-Proprietary
- DM1
- EAC1-K
- EBC1
- EBC2 Wheel Speed Proprietary
- EBC4 Wheel Brake Lining Remaining Information
- EBC5
- EEC1
- EEC2
- Engine Configuration Messages
- Engine Fluid Level/Pressure 1
- Engine Hours, Revolutions
- Engine Temperature
- ERC1-RD
- ETC1 - T
- ETC1 - CV
- ETC2
- ETC7
- Fuel Consumption
- Fuel Economy
- High Resolution Vehicle Distance
- Inlet/Exhaust Conditions
- PTO information Proprietary
- Retarder Fluids
- Supply Pressure
- TCO1
- Time/Date
- Transmisson Control 1 (TC1)
- Transmission Fluids
- Transmission Proprietary/DLN5
- Transmission Proprietary 2 - T
- Transmission Proprietary 2 - AWD
- Vehicle Weight
- Vehicle Weight
- Requirements for CAN communication with the vehicle
©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Requirements for CAN communication with the vehicle
11:90-01 Issue 1 en-GB 137 (139)
Parameter group numbers
In addition to the parameter group numbers (PGN) specified in SAE J1939-71, there
are a number of PGNs specified by Scania. A number of these are used on the exter-
nal CAN bus. Refer to table 2. These PGNs must not be used for any other purpose.
Table 2: Scania-specified messages on the external CAN bus.
Name PGN (Hex) Standard priority
Alarm Status Proprietary 00 FF B4 6
CUV Information 00 FF B1 6
Cab Information Proprietary 1 00 FF 96 6
Coordinator General Information 00 FF B0 3
Coordinator General Information 2 00 FF AF 3
Crash Occured 00 FF FD 6
DLN2 Proprietary 00 FF 81 6
Transmission Proprietary (DLN5) 00 FF A0 6
DLN8 Proprietary 00 FF 88 6
EBC2 Proprietary 00 FF 19 6
PTO Information 00 FF 90 6
Transmission Proprietary 2 -T 00 FF A1 6
Transmission Proprietary 2 -AWD 00 FF A1 6
Scania Bodywork Control Message 1 00 FF F8 3
Scania Bodywork Control Message 2 00 FF F9 3
Scania Bodywork Control Message 3 00 FF E6 3
Scania Bodywork Status Message 1 00 FF E8 3