User Manual
Table Of Contents
- CAN interface for bodywork
- Introduction
- Summary of CAN messages
- Detailed description of CAN messages
- Explanation
- CAN messages sent to the vehicle
- CAN messages sent from the vehicle
- Software identification
- Scania bodywork status message 1
- Air Supply Pressure
- Air Suspension Control 1
- Alarm Status Proprietary
- Ambient Conditions
- BAM-E
- Cab Illumination Message
- Cab Information Proprietary 1
- Cruise Control/Vehicle Speed
- Crash Occured
- Coordinator General Information
- Coordinator General Information 2
- CUV information
- Dash Display
- DLN2-Proprietary
- DLN5-Proprietary
- DLN8-Proprietary
- DM1
- EAC1-K
- EBC1
- EBC2 Wheel Speed Proprietary
- EBC4 Wheel Brake Lining Remaining Information
- EBC5
- EEC1
- EEC2
- Engine Configuration Messages
- Engine Fluid Level/Pressure 1
- Engine Hours, Revolutions
- Engine Temperature
- ERC1-RD
- ETC1 - T
- ETC1 - CV
- ETC2
- ETC7
- Fuel Consumption
- Fuel Economy
- High Resolution Vehicle Distance
- Inlet/Exhaust Conditions
- PTO information Proprietary
- Retarder Fluids
- Supply Pressure
- TCO1
- Time/Date
- Transmisson Control 1 (TC1)
- Transmission Fluids
- Transmission Proprietary/DLN5
- Transmission Proprietary 2 - T
- Transmission Proprietary 2 - AWD
- Vehicle Weight
- Vehicle Weight
- Requirements for CAN communication with the vehicle
©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Detailed description of CAN messages
11:90-01 Issue 1 en-GB 16 (139)
Not available or not installed 11
72Torque limit 2
Torque limit 2 not requested 00
Torque limit 2 requested 01
Error indicator 10
Not available or not installed 11
412Engine start
Engine start not requested 00
Engine start requested 01
Error indicator 10
Not available or not installed 11
Not defined
3..4 Monitored engine stop
5 2 Monitored engine stop not requested 00
Monitored engine stop requested 01
Error indicator 10
Not available or not installed 11
7..8 Not defined
512PTO1/external equipment 1 activation
External equipment 1 not requested 00
External equipment 1 requested 01
Error indicator 10
Not available or not installed 11
32PTO2/external equipment 2 activation
External equipment 2 not requested 00
External equipment 2 requested 01
Byte Bit Length Explanation State Resolution Limits Note