User Manual

Table Of Contents
©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Detailed description of CAN messages
11:90-01 Issue 1 en-GB 19 (139)
B: Used to activate the Limited hand throttle and Pre-defined (locked) engine speed
functions.
C: Used to activate the Raised idling speed and Pre-defined (locked) engine speed
functions.
D: Only applicable if the CAN interface version is 2 or higher. Version number can
be read from the CAN message Software Identification. Note: Byte 1, Message Con-
figuration Version, must be set to 02h so that the control unit can interpret the Work
light control command.
E: Only applicable if the CAN interface version is 3 or higher.
F: Only applicable if the CAN interface version is 4 or higher.