User Manual
Table Of Contents
- CAN interface for bodywork
- Introduction
- Summary of CAN messages
- Detailed description of CAN messages
- Explanation
- CAN messages sent to the vehicle
- CAN messages sent from the vehicle
- Software identification
- Scania bodywork status message 1
- Air Supply Pressure
- Air Suspension Control 1
- Alarm Status Proprietary
- Ambient Conditions
- BAM-E
- Cab Illumination Message
- Cab Information Proprietary 1
- Cruise Control/Vehicle Speed
- Crash Occured
- Coordinator General Information
- Coordinator General Information 2
- CUV information
- Dash Display
- DLN2-Proprietary
- DLN5-Proprietary
- DLN8-Proprietary
- DM1
- EAC1-K
- EBC1
- EBC2 Wheel Speed Proprietary
- EBC4 Wheel Brake Lining Remaining Information
- EBC5
- EEC1
- EEC2
- Engine Configuration Messages
- Engine Fluid Level/Pressure 1
- Engine Hours, Revolutions
- Engine Temperature
- ERC1-RD
- ETC1 - T
- ETC1 - CV
- ETC2
- ETC7
- Fuel Consumption
- Fuel Economy
- High Resolution Vehicle Distance
- Inlet/Exhaust Conditions
- PTO information Proprietary
- Retarder Fluids
- Supply Pressure
- TCO1
- Time/Date
- Transmisson Control 1 (TC1)
- Transmission Fluids
- Transmission Proprietary/DLN5
- Transmission Proprietary 2 - T
- Transmission Proprietary 2 - AWD
- Vehicle Weight
- Vehicle Weight
- Requirements for CAN communication with the vehicle
©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Detailed description of CAN messages
11:90-01 Issue 1 en-GB 59 (139)
EAC1-K
Identifier: 18 F0 06 27
Transmission interval: 500 ms
Always sent from BWS. When no differential lock is installed, the message contains
no information.
Byte Bit Length Explanation State Resolution Limits Note
118Location 1 0 to 255 A
Axle1 tire1 0000
Axle1 tire2 0001
Axle1 1111
Axle2 tire1 10000
Axle2 tire2 10001
Axle2 tire3 10010
Axle2 tire4 10011
Axle2 11111
Axle3 tire1 100000
Axle3 tire2 100001
Axle3 tire3 100010
Axle3 tire4 100011
Axle 3 101111
Axle4 tire1 110000
Axle4 tire2 110001
Axle4 tire3 110010
Axle4 tire4 110011
Axle4 111111
Error FE