User Manual
Table Of Contents
- CAN interface for bodywork
- Introduction
- Summary of CAN messages
- Detailed description of CAN messages
- Explanation
- CAN messages sent to the vehicle
- CAN messages sent from the vehicle
- Software identification
- Scania bodywork status message 1
- Air Supply Pressure
- Air Suspension Control 1
- Alarm Status Proprietary
- Ambient Conditions
- BAM-E
- Cab Illumination Message
- Cab Information Proprietary 1
- Cruise Control/Vehicle Speed
- Crash Occured
- Coordinator General Information
- Coordinator General Information 2
- CUV information
- Dash Display
- DLN2-Proprietary
- DLN5-Proprietary
- DLN8-Proprietary
- DM1
- EAC1-K
- EBC1
- EBC2 Wheel Speed Proprietary
- EBC4 Wheel Brake Lining Remaining Information
- EBC5
- EEC1
- EEC2
- Engine Configuration Messages
- Engine Fluid Level/Pressure 1
- Engine Hours, Revolutions
- Engine Temperature
- ERC1-RD
- ETC1 - T
- ETC1 - CV
- ETC2
- ETC7
- Fuel Consumption
- Fuel Economy
- High Resolution Vehicle Distance
- Inlet/Exhaust Conditions
- PTO information Proprietary
- Retarder Fluids
- Supply Pressure
- TCO1
- Time/Date
- Transmisson Control 1 (TC1)
- Transmission Fluids
- Transmission Proprietary/DLN5
- Transmission Proprietary 2 - T
- Transmission Proprietary 2 - AWD
- Vehicle Weight
- Vehicle Weight
- Requirements for CAN communication with the vehicle
©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Summary of CAN messages
11:90-01 Issue 1 en-GB 7 (139)
Fuel Consumption 18 FE E9 00 EMS SAE J1939-71
Fuel Economy 18 FE F2 00 EMS SAE J1939-71
CC/Vehicle speed 18 FE F1 00 EMS SAE J1939-71
Inlet/Exhaust cond. 18 FE F6 00 EMS SAE J1939-71
BAM-E 18 EC FF 00 EMS SAE J1939-71
Engine Configuration Messages 18 EB FF 00 EMS SAE J1939-71
ETC1 0C F0 02 03 SAE J1939-71 Only sent if the vehicle has Opticruise or an
Allison automatic gearbox
ETC2 18 F0 05 03 SAE J1939-71
Transmission fluid 18 FE F8 03 SAE J1939-71 Only sent if the vehicle has an Allison gear-
box
Message to vehicle Identifier (Hex) Source address Specification Remarks
ERC1-RD 18 F0 00 10 RET SAE J1939-71 Only sent if the vehicle has a Retarder or an
Allison automatic gearbox
EAC1-K 18 F0 06 27 COO SAE J1939-71
Ambient Conditions 18 FE F5 27 COO SAE J1939-71
Dash Display 18 FE FC 27 COO SAE J1939-71
Engine Fluid Level/Pressure 18 FE EF 27 COO SAE J1939-71
Supply Pressure 18 FE AE 30 APS SAE J1939-71
Vehicle Weight 18 FE EA 2F SMS SAE J1939-71 Only sent if the vehicle has SMS and is
equipped with pressure sensors in the bel-
lows
TCO1 0C FE 6C EE TCO SAE J1939-71
High Resolution Vehicle Distance 18 FE C1 EE TCO SAE J1939-71
Illumination 18 D0 FF 17 ICL SAE J1939-71
Time/Date 18 FE E6 17 ICL SAE J1939-71
Message to vehicle Identifier (Hex) Source address Specification Remarks