User Manual

©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Detailed description of CAN messages
11:90-01 Issue 1 en-GB 78 (139)
Error indicator FExx
Not available FFxx
12 1 8 Percent torque at point 4 1 % -125 % to +125 %
Error indicator FE
Not available FF
13 1 16 Engine speed at point 5 0.125 r/min 0 to 8 031.875 r/min
Error indicator FExx
Not available FFxx
15 1 8 Percent torque at point 5 1 % -125 % to +125 %
Error indicator FE
Not available FF
16 1 16 Engine speed at high idle, point 6 0.125 r/min 0 to 8 031.875 r/min
Error indicator FExx
Not available FFxx
20 1 16 Reference engine torque 1 Nm 0 to 64 255 Nm
Error indicator FExx
Not available FFxx
22 1 16 Maximum momentary engine override speed,
point 7
0.125 r/min 0 to 8 031.875 r/min
Error indicator FExx
Not available FFxx
24 1 8 Maximum momentary over-ride time limit 0.1 s 0 to 25 s
Error indicator FE
Not available FF
26 1 8 Requested speed control range upper limit 10 r/min 0 to 2 500r/min
Error indicator FE
Byte Bit Length Explanation State Resolution Limits Note