User Manual

Table Of Contents
©
Scania CV AB 2013, Sweden
CAN interface for bodywork
Detailed description of CAN messages
11:90-01 Issue 1 en-GB 89 (139)
ETC1 - CV
Identifier: 0C F0 02 43
Transmission interval: 10 ms
Byte Bit Length Explanation State Resolution Limits Note
112Driveline engaged 00
Driveline disengaged 01
Driveline engaged 10
Error indicator 11
Not available or not installed
32Torque converter lockup engaged
Torque converter lockup disengaged 00
Torque converter lockup engaged 01
Reserved 10
Don’t care/take no action 11
52Shift in progress
Shift is not in progress 00
Shift in progress 01
Error indicator 10
Not available or not installed 11
7..8 Not defined
2116Output shaft speed 0.125 r/min 0 to 8 031.875 r/min
Error indicator FExx
Not available FFxx
418Percent clutch slip 0.4% 0 to 100%
Error FE
Not available FF