Specifications

6
Getting Started
Before using the scanner
The application has been carefully packaged to avoid damage during transportation.
Before operating the scanner, please remove the packaging materials. After removing the
packaging materials, you will find the following:
 ScanShell® scanner
 CD of the application
 USB interface cable
 User license card
 Calibration card (only with ScanShell® 800/800N)
 Cleaning Sheet
Minimum system requirements
The minimum system requirements are:
 Pentium III with 128MB
 Windows 98 Second Edition or higher
 USB port
 15MB free storage space
Connecting the scanner
The scanner is connected to the computer via the USB port. To connect the reader, do the
following:
 Place the scanner on a flat, firm, solid surface with easy access.
 Plug the USB interface cable into the USB port of the computer
 After the Add new hardware wizard dialog box appears, click Next until you are
asked to set the driver for the reader. You will find the driver on the Installation CD at:
<CD ROM drive>:\Scanner Driver\ScanShell800 (for scanner model
ScanShell800)
<CD ROM drive>:\Scanner Driver\ScanShell800N (for scanner model
ScanShell800N)
<CD ROM drive>:\Scanner Driver\ScanShell1000 (for scanner model
ScanShell1000)
<CD ROM drive>:\Scanner Driver\MagShell900 (for magnetic reader
model MagShell900)
After you specify the driver, click Next until the installation is complete.