Datasheet

Or if you are requested to input the encryption, you can do as below
1. Select the one you want to use
2. Then it will show you
Note: The encryption code would have been set up by the person who set up and
configured your network.
After 3 seconds the display goes into the code entry mode or press “enter”.
Please refer to the 1.2.5 to know clear of the “Remote control character list” for you
to enter the passwords. Press “►” button to go to the next word, press “◄” button to
delete the wrong word you have entered.
3. If you complete the key then you can use “Enter” to confirm. The display shows
“Connect WIFI” as the radio connects to the network.
4. If the connecting is OK, it will show you
3
Connectin g
to ne twor k
My Me d iaU
Internet Rad i o
Media Center
<l inks ys> >
Enter Password
■
1/ 1
←Move→ INPUT:0 9↑ ↓ OK←