Datasheet

7
1.5 Configuration
1.5.1Configuration－Internet
1.5.1.1 Wireless Setting
Description: Setting WiFi to Enable or Disable.
Function Indication:
1.Select“Enable”and connect to the AP which you wish from“WIFI AP List”
2.Passwords required on WEP/WPA if the AP is with protect code which is
30 words maximum; You can access network directly if it's without any
passwords
Remark: 1)When you enter this menu, it will remain on the previous option.
1.5.1.2 WiFi IP Property
Description: WIFI IP setting
Function Indication:
1.You can select 'Auto setting' / 'Manual setting'
2.When you select 'Manual setting', you need to do the setting as following
steps:
Step1: IP Address setting
Step2: Subnet Mask setting
Step3: Default Gateway setting
Step4: Preferred DNS Server setting
Step5: Alternate DNS Server setting
Remark: It will be turned into a required screen:” Quit the setting or not”
when any key will be skipped, and you can select “Yes” for exit and “No” for
back to the previous step.
Remark: 1)When you enter this menu, it will remain on the previous option.
1.5.2 Configuration－Date & Time
1.5.2.1 Date & Time setting
Description: Currently Date & Time setting
Remark: You can press“▲” “▼”buttons for parameter setting, and move cursor
with“◄” “►”buttons and press 'Enter' to confirm.1.5.2.2 Time Format setting
Description: Time format setting: 12hours / 24hours
Remark: When you enter this menu, it will remain on the previous option.
1.5.2.2 Date Format setting
Description: Date format: YY/MM/DD、DD/MM/YY and MM/DD/YY
Remark: When you enter this menu, it will remain on the previous option.