Operation Manual

GB
- 25 -
4. Remove the cable charger.
Pairing the transmitter with the receiver
"Pairing" means making a wireless connection between the
transmitter and the Bluetooth receiver.
Before being able to use the transmitter with a receiver, you
need to pair them.
After being turned on, the transmitter automatically scans,
pairs and connects to the receiver.
Once pairing is established, both devices search for each
other and connect automatically whenever they are
switched on.
Important note: The stereo transmitter pairs only with
receivers which have a factory PIN-Code equal to '0000',
'1234' or '8888'.
After pairing, you can use the transmitter with an Bluetooth
receiver.
If you wish to use the transmitter with another receiver, you
need to pair them also.
In this case, the transmitter will not re-connect with the pre-
vious device until you pair them again.
Manual_Transmitter_DE_GB_Dansk.qxp 16.03.20