Operation Manual

9
DA18
FM DAB+
MEMORIZZARE E RICHIAMARE LE STAZIONI RADIO
Sia in modalità DAB che in modalità FM potete memorizzare un massimo di 10 stazioni che potrete
richiamare direttamente.
1. Per memorizzare una stazione, prima sintonizzatevi sulla stazione desiderata, poi tenete
premuto il pulsante PRESET. Sul display comparirà la scritta “Empty preset 1” e il numero
della memoria lampeggerà. (Fig. 8)
2. Premeteilpulsante▲o▼perselezionareilnumerodimemoriadesiderato.
3. Premete SELECT per confermare la scelta, e sullo schermo comparirà la scritta “Preset #
saved”. (Fig. 9)
4. Per richiamare una stazione memorizzata, per prima cosa premete una volta il pulsante
PRESET,poipremeteilpulsante▲o▼perscorrerefralestazionicheavetememorizzato.
Quando sullo schermo compare il numero della memoria desiderata, rilasciate i pulsanti. Se
la memoria non contiene stazioni, sullo schermo comparirà la scritta “Empty preset #”.
UK-4
UK-5
UK-6
UK-7
DAB auto scan
The auto scan will search for the entire DAB Band III channels. After the scan has finished, the first alphan umerically
found station will be automatically selected.
1. To activate auto scan, firs t press the MENU button to enter into the Tune Select Menu and then press the ▲ o r
▼ button to select “Autoscan”, finally press the SELECT button to confirm, the display will show “Scanning …”
and a progres sing slide bar. (F. 3)
2. All the stations that have been found will be stored
automatically, to explore the stations that have been found,
press the ▲ or ▼ buttons and when you find a station tha t you would like to lis ten to, press the SELECT button.
DAB manual tune
1. To select manual tune, first press the MENU button to enter into the T une Select Menu, th en press the SELECT
button to select “Manual tune”. (F. 4) (F. 5)
2. Press the ▲ or ▼ button to move through the DAB channels, the display wil l show “5A to 13F” and their
associated frequencies.
3. When your desi red frequency appears in the disp lay, press
the SELECT button to confirm. The name of the
station group (ensemble/mu ltiplex) will be displayed.
4. To listen to the station selected, press the SELECT button again.
DAB secondary services
On some occasions you will see a “>” symbol directly after the name of the statio n, this indicates that there are
secondary services available to that station. These secondary services contain extra services that relate to the
primary station. E.g. a sports station may want to add extra commentaries
. The secondary services are inserted
directly after the primary station. To select the seco ndary station, press on the SELECT control once.
DAB display modes
Every time you press the INFO button, the display will cycle through the following display modes:
FACTORY RESET
When you move the radio to anothe r part of the country, your pre-tuned and store d DAB stations may no longer be
available . If this is the case then you will need to reset your radio back to its original factory settings; to perform a
factory res
et, please do the following:
Note: All of your stored DAB & FM presets will be lost once the reset has taken place.
HEADPHONE JAC K
A 3.5mm type headphone jack is located at the back of the radio. Connect a set of headphones (not inc luded) to this
jack for private listening with out disturbi ng others. The speaker is automatically disconnected when the headphones
are in use.
IMPORTANT: When using headphones always set the volume to a low level before you put the headphones on.
Then insert the headphones and gra
dually incr ease the volume to a co mfortable listening level.
1. Connect the radio to AC mains (via the AC/DC adaptor), then slide the POWER ON/OFF switch to the “ON”
position to turn the radio on.
2. Press and hold the MENU button until the display shows “Press SELECT to confirm reset”.
3. Release the MENU button and press the SEL ECT button once, th e display will first show “Restarting …” and
after the reset is completed, the radio will then automatically enter into the DAB mode and perform auto scan
function. After the sc a
n has finished, the radio will select and display the first alphanumerically found station.
SPECIFICATION
***SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.
POWER SUPPLY :
AC/ DC ADAPTOR INPUT: 100 -240V~60/50Hz OUTPUT: 6V 0.8A
DC(BATTERY) 6V 1.5V(UM3) x 4
OUTPUT POWER : 1.0 W
FREQUENCY RANGE : DAB 174 - 240 MHz
FM 87.5 - 108 MHz
UNIT DIMENSION : 181 (L) x 45 (W) x 105 (H) mm
WEIGHT: 0.4kg
FM radio
1. To select FM, press the MODE button, the display will show FM and the frequency.
2. To activate auto search, press and hold the ▲ or ▼ button until it start
s to scan up or down the frequency band,
the display will show “Searching … > .” or “Searching … < .”, and it will stop automatically once a station has
been found. (F. 6)(F. 7)
3. To activate manual search , repeatedly pres s the ▲ or ▼ button.
4. To select audio mode, press the SELECT button to toggle betw een the “Auto” or “Mono” selection.
Note: The radio will automatically switch between stereo and mono mode, but you can override this and s witch this
function manually which is helpful for poor signal reception.
STO R I N G A N
D RECALLING STO R E D STATIONS
In either DAB or FM mode, you can store up to 10 stations to the favourite presets; this will enable you to get direct
access to your favourite stations.
1. To store a preset, first tun e to your desired station, th en pr ess and hold the PRESET button, th e dis play will
show “Empty preset 1”, and the preset number will flash. (F. 8)
2. Press the ▲ or ▼ butt on to select your des ired station preset number.
3. Press the SELECT to confirm your selection, the display will show “Preset # saved” (F. 9)
4. To reca
ll a preset station, first press the PRESET button once, then press the ▲ or ▼ button to scroll up or
down the presets that you have stored. When the dis play shows your desired preset number, release the
buttons. If the preset hasn't been allocated a station, the display will show “Empty pres et #”.
Time and date
The time and date will be aut omatically upd ated by the broadcasted information; it is no need to set the clock
manually. In the unlikely event that no clock information is received, the dis play will show “<TI
ME/DATE>”.
Frequency
The frequency of the present station will be displayed.
Audio bit rate
The display will show the digital audio bit rate bein g received.
Signal strength
The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the bar will be from
left to right.
DLS
DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include in their
transmissions. The message usually includes information such as programme details …etc.
Programme type
This describes
the style of the programme that is being broadcast. If the information is not avai lable, the display will
show “<Programme Type>”.
Ensemble/Multiplex (Gro up name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a single
frequency. There are national and local multiplexes , local ones contai n stations that are specific to that area.
Note: Press and hold the INFO button for lon ger than 2 seconds, the software version number will be displayed.
Ensemble/Multiplex(Group name)
Time/Date
Signal strength
DLS
Audio Bit Rate
Programme Type
Frequency
F.3
F.4
F.5
F.8
F.6
F.7
F.9
RIPRISTINO IMPOSTAZIONI DI FABBRICA
Se spostate la radio in una zona diversa del Paese, le stazioni DAB presintonizzate e memorizzate
potrebbero non essere più disponibili. In questo caso, avrete bisogno di ripristinare le impostazioni di
fabbrica della vostra radio. Per farlo, seguite questa procedura:
1. collegate la radio a una presa di corrente CA (utilizzando l’adattatore CA/CC) e spostate
l’interruttore POWER ON/OFF sulla posizione “ON” per accendere la radio.
2. TenetepremutoilpulsanteMENUnchésulloschermononcomparelascritta“Press
SELECTtoconrmreset”.
3. Rilasciate il pulsante MENU e premete una volta il pulsante SELECT: sul menu
compariranno prima la scritta “Restarting …” e, una volta completato il ripristino, la radio
entrerà automaticamente in modalità DAB, effettuando una scansione automatica. Una
volta terminata la scansione, la radio selezionerà e mostrerà la prima stazione in ordine
alfabetico.
Nota: una volta completato il ripristino, tutte le stazioni DAB e FM memorizzate andranno perse.
JACK CUFFIE
Sulretrodellaradioèpresenteunjackda3,5mmperlecufe.Collegatedellecufe(nonincluse)
aquestauscitaperascoltaresenzadisturbareglialtri.Quandovengonoutilizzatelecufe,gli
altoparlanti smettono automaticamente di funzionare.
IMPORTANTE:quandoutilizzatelecufe,regolatesempreilvolumeaunlivellobassoprimadi
indossarle.Poicollegateleeaumentategradualmenteilvolumenoaraggiungereillivelloadeguato.
SPECIFICHE TECNICHE
ALIMENTAZIONE: ADATTATORE CA/CC
INGRESSO: 100-240 V ~ 60/50 Hz
USCITA: 6 V 0,8 A
CC (BATTERIA) 6 V 1,5 V (UM3) x 4 1,0 W
DAB 174-240 MHz
POTENZA IN USCITA: GAMMA DI FREQUENZA:
FM 87,5-108 MHz
DIMENSIONI DELL’UNITÀ PRINCIPALE:
81 x 45 x 105 mm
PESO: 0,4 kg
***SPECIFICHE SOGGETTE A MODIFICA SENZA PREAVVISO.