Operation Manual

13
If you cannot received any DAB signal, you can manually set the time. Once DAB signal is
received, the time will be automatically updated.
setting the daily timer
1. Press and hold TIMER on the remote control until the
2. Press to adjust the hour digits, and then press
TIMER
display.
3. Press
to adjust the minute digits, and then press
TIMER
4.
5. Press to adjust the hour digits, and then press
TIMER
display.
6. Press
on the remote control to adjust the minute
digits, and then press TIMER
7. Finally Press to select DAB, FM, DISC or USB mode,
then press TIMER
to adjust the volume, and then
press TIMER
9. The Timer setting is now complete.
8. Press TIMER to select "Timer On",wait for a while “ ” icon will show on the display to
indicator the timer is on.
to cancel the daily timer
Press TIMER on the remote control repeatedly to select mode. The “ ” indicator
will disappear from the display.
setting the sleep timer
By setting the sleep timer, you can fall asleep to music and know that your system will turn
1. To set the sleep timer press SLEEP on the remote control repeatedly to view the
90 80
OFF 10 20 30 40
70 60 50
2.
display will show “SLEEP #”, e.g. “SLEEP 10
10 minutes, “SLEEP 20
3. Press SLEEP
back to previous screen.
16
2. The system is now set to turn off after the number of minutes you have
set. The display will show “SLEEP #”, e.g. “SLEEP 10” means the unit
will switch itself off after 10 minutes, “SLEEP 20” means the unit will
switch itself off after 20 minutes, and so on.
3. Press SLEEP to show the reminding time till the unit switches off
minutes and return back to previous screen.
4. To cancel the sleep timer press SLEEP repeatedly until “Sleep OFF”
shows on the display.
EQ control
the system supports a variety of equalizers and sound effects.
During playback, press EQ on the remote control to select a desired music
mode. Each time EQ is pressed, the music mode will change to the next
one as follows:
4. To cancel the sleep timer press SLEEP repeatedly until “Sleep OFF” shows on
the display.
EQ control
During playback, press EQ on the remote control to select a desired music mode. Each time
EQ is pressed, the music mode will change to the next one as follows:
FLAT ROCKCLASSIC JAZZPOP
system reset
There may be times when you need to reset your unit back to the factory settings especially
when you have moved house. If you experience reception problems you may want to reset
and try again. If you move to another part of the country and pick up the local and national
DAB stations in that area, your previously tuned channels may no longer be available.
1. During DAB mode, open the CD Disk tray then press and
hold STOP on the unit until the display show “Restarting…
FACTORY RESET”.
2. When successful reset, it will back to DAB mode.
After the system reset, all the tuned stations, FM/DAB preset
stations will be erased.
17
Restarting . . .
FACTORY RESET
System reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you experience
reception problems you may want to reset and try again. If you move to
another part of the country and pick up the local and national DAB stations
in that area, your previously tuned channels may no longer be available.
1. During DAB mode, open the CD Disk tray
then press and hold STOP on the unit until
the display show “Restarting… FACTORY
RESET”.
4. To cancel the sleep timer press SLEEP repeatedly until “Sleep OFF” shows on
the display.
EQ control
During playback, press EQ on the remote control to select a desired music mode. Each time
EQ is pressed, the music mode will change to the next one as follows:
FLAT ROCKCLASSIC JAZZPOP
system reset
There may be times when you need to reset your unit back to the factory settings especially
when you have moved house. If you experience reception problems you may want to reset
and try again. If you move to another part of the country and pick up the local and national
DAB stations in that area, your previously tuned channels may no longer be available.
1. During DAB mode, open the CD Disk tray then press and
hold STOP on the unit until the display show “Restarting…
FACTORY RESET”.
2. When successful reset, it will back to DAB mode.
After the system reset, all the tuned stations, FM/DAB preset
stations will be erased.
17
Restarting . . .
FACTORY RESET
2. When successful reset, it will back to DAB mode.
general operation
powering ON/OFF
Scan Time
00:00:00” and synchronize to the current local time if you can receive a DAB signal in your
location. After approximate one minute, it will switch to STANDBY mode.
t Press on the unit or press ON/STAND-BY on the remote control to switch the unit to
ON mode.
t Press to switch the unit back to STANDBY mode.
t
completely.
t When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
t
selecting modes
Press MODE repeatedly to switch between DAB, FM, CD, USB, AUX and Bluetooth modes.
adjusting the volume
t Turn the VOLUME +/– dial on the unit or press VOLUME +/– on the remote control to
adjust the volume.
t
MUTE on the remote control. Press MUTE again
or press VOLUME +/– on the remote control or turn VOLUME +/– to resume normal
listening.
auto setting the clock
The clock can be updated automatically if you can receive a DAB signal in your location.
In order to synchronise to the current local time you must leave it on the DAB station for a
short period of time.
manually setting the time
1. During Standby mode, press and hold CLOCK on the remote control. The hour digits
2. Press to adjust the hour digits, and then press CLOCK
3. Press to adjust the minute digits, and then press CLOCK
4. The time is now set.
15
MODE repeatedly on the unit or press
CD, USB, TUNER/DAB, AUDIO IN,
BLUETOOTH on the remote
After the system reset, all the tuned stations, FM/DAB preset
stations will be erased.
DAB operation
If the unit is connected to the mains power and then switched on from
standby for the rst time, the unit will automatically enter into the DAB
mode and perform auto scan function. During the scan the display will show
“Scanning…” together with a slide bar that indicates the progress of the
scan and the amount of stations that have been found so far.