Operation Manual

17
general operation
powering ON/OFF
Scan Time
00:00:00” and synchronize to the current local time if you can receive a DAB signal in your
location. After approximate one minute, it will switch to STANDBY mode.
t Press on the unit or press ON/STAND-BY on the remote control to switch the unit to
ON mode.
t Press to switch the unit back to STANDBY mode.
t
completely.
t When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
t
selecting modes
Press MODE repeatedly to switch between DAB, FM, CD, USB, AUX and Bluetooth modes.
adjusting the volume
t Turn the VOLUME +/– dial on the unit or press VOLUME +/– on the remote control to
adjust the volume.
t
MUTE on the remote control. Press MUTE again
or press VOLUME +/– on the remote control or turn VOLUME +/– to resume normal
listening.
auto setting the clock
The clock can be updated automatically if you can receive a DAB signal in your location.
In order to synchronise to the current local time you must leave it on the DAB station for a
short period of time.
manually setting the time
1. During Standby mode, press and hold CLOCK on the remote control. The hour digits
2. Press to adjust the hour digits, and then press CLOCK
3. Press to adjust the minute digits, and then press CLOCK
4. The time is now set.
15
MODE repeatedly on the unit or press
CD, USB, TUNER/DAB, AUDIO IN,
BLUETOOTH on the remote
Afspilleren skifter automatisk mellem stereo og mono, men du kan
underkende dette og vælge at skifte manuelt. Det er nyttigt, hvis du
modtager et signal, der går svagt igennem.
Forudindstillede stationer
Du kan gemme op til 30 af dine foretrukne stationer i afspillerens
hukommelse. Dette giver dig hurtig og nem adgang til dine favoritkanaler.
1. Hvis du vil gemme en station på en fast programplads, skal du først
stille ind på stationen og dernæst trykke og holde knappen MEMORY.
Displayet viser “Preset Store <#: (Empty)>”.
2. Tryk på knappen PRESET og vælg nummeret på den faste
programplads, hvor du vil gemme stationen. Tryk dernæst på ENTER
for at bekræfte.
3. Det tager nogle få sekunder at gemme stationen, hvorefter displayet
viser “Preset # Stored”.
Genkald af en fast station
1. Når du har gemt en station på en af de faste programpladser, kan du
genkalde den ved at trykke på knappen MEMORY.
2. Tryk på knappen PRESET, indtil den ønskede station vises på
displayet. Tryk dernæst på ENTER for at bekræfte.
general operation
powering ON/OFF
Scan Time
00:00:00” and synchronize to the current local time if you can receive a DAB signal in your
location. After approximate one minute, it will switch to STANDBY mode.
t Press on the unit or press ON/STAND-BY on the remote control to switch the unit to
ON mode.
t Press to switch the unit back to STANDBY mode.
t
completely.
t When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
t
selecting modes
Press MODE repeatedly to switch between DAB, FM, CD, USB, AUX and Bluetooth modes.
adjusting the volume
t Turn the VOLUME +/– dial on the unit or press VOLUME +/– on the remote control to
adjust the volume.
t
MUTE on the remote control. Press MUTE again
or press VOLUME +/– on the remote control or turn VOLUME +/– to resume normal
listening.
auto setting the clock
The clock can be updated automatically if you can receive a DAB signal in your location.
In order to synchronise to the current local time you must leave it on the DAB station for a
short period of time.
manually setting the time
1. During Standby mode, press and hold CLOCK on the remote control. The hour digits
2. Press to adjust the hour digits, and then press CLOCK
3. Press to adjust the minute digits, and then press CLOCK
4. The time is now set.
15
MODE repeatedly on the unit or press
CD, USB, TUNER/DAB, AUDIO IN,
BLUETOOTH on the remote
De lagrede stationer gemmes i systemets hukommelse og slettes
ikke, selvom der slukkes for apparatet. Hvis du gemmer en ny
station på en fast programplads, overskrives den station, der
tidligere lå på pladsen.
FM-displayet
Tryk på knappen DISPLAY på fjernbetjeningen, hvorefter displayet skifter
mellem følgende oplysninger.
Oplysningerne for hvert skærmbillede vises i nederste halvdel af displayet.
Radio Text
Dette er en rulletekst med oplysninger om det
aktuelle program.
Programme Type
Her angives “stil” eller “genre” for det program, der
sendes.
recalling a stored station
1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
MEMORY.
2. Press PRESET until your desired station show on the display; Then press ENTER
conrm.
a new station into a preset location will erase the previously stored station in that location.
FM display modes
Press DISPLAY on the remote control, the display will switch through the following display
modes.
The information of each display mode is displayed on the lower segment of the display.
Radio Text
This is a scrolling message displaying information
about the current programme.
Programme Type
This describes the “style” or “genre” of the
programme that is being broadcast.
Station Name
This displays the station name.
Audio Type
This displays if the station being received is in mono
or stereo.
Radio Text
Programme Type
Station Name
Audio Type
22