Operation Manual

5
To adjust the volume from the front panel controls:
• Turn the VOLUME knob to increase or decrease the volume level.
When the volume is adjusted the display will change to show the current volume setting on a
bar graph.
To mute the sound:
• Press the MUTE button.
The sound will mute and ‘Muted’ will be displayed.
• Press the MUTE button again to restore the sound to its previous volume level.
RE-SCANNING FOR DAB STATIONS
When first used, your radio scanned the DAB band for available stations. The station services
found were then stored in your system’s memory.
You can re-scan the band at any time if you move to a different area or just to refresh the
stored list of available stations.
To scan for DAB stations manually:
• Select the DAB band.
• Press the AUTO SCAN button on the top panel.
The scanning process will take a few minutes. The number of services found during the scan
will be-shown at the right side of the display.
After the scan, the radio will re-tune to the first station in the station list to play if it is available.
Alternatively, you can continue to browse for another station as described on the previous
page.
DISPLAY MODE OPTIONS
The bottom line of the display can be switched to show different items of information that may
be transmitted with a DAB station.
Choosing the information display:
Press the INFO. button on the top panel repeatedly to change the information displayed while
playing a DAB radio station.
The full range of display options are shown below. Some stations may not broadcast all of
these options.
ADJUSTING THE VOLUME
DAB SCANNING
DAB DISPLAY MODES