Operation Manual

The way to Prune



Note: want to remove all inactive stations? it’s easy!

1. Press MENU  turn the scroll knob to < Prune >, press this knob to confirm.

2. Turn the scroll knob to ‘Yes’, press this knob to confirm.

View Station Information

It is possible to view the information that is displayed on the second line of the display when

listening to a DAB/DAB+ or FM program by pressing INFO repeatedly.

FM MODE

Tune in FM Mode

1. Press MODE to convert radio from DAB mode into FM mode.

2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz).

Otherwise, the last listened FM station should be selected.

3. To manually change FM frequency, while frequency is showing up, turn the scroll knob

to change it 0.05MHz per step.

4. To auto-search, simply press SCAN, the display will show the frequency changing until it

reaches the active station.

Scan setting

 By default, FM scans stop at any available station. This may result in a poor signal-to-

noise ratio (hiss) from weak stations.

 To change the scan settings to stop only at stations with good signal strength, 2 steps:

1. Press MENU, it will show: ‘Scan Setting’, press the scroll knob to confirm.



2. Turn the scroll knob to ‘Strong stations only’, press this knob to confirm.