Operation Manual
8
DAB/DAB+ MODE
Turn on
1. Extend the antenna found on the back of radio, press STANDBY/ON to switch on radio.
2. For initial use, radio will make a full scan and store detected stations into its memory.
3. Once the scanning is completed, the DAB/DAB+ stations will be displayed in
alphanumeric order and radio will access the first station in the list.
Note: if no DAB/DAB+ signal is found in your area, it may be necessary for you to relocate your
radio.
Shift to another DAB/DAB+ Station
While a program is playing, turn the scroll knob to cycle through available stations, press
it to confirm and then your radio will connect the selected station.
Update Stations List
Note: to do this order, placing your radio to stronger signal position is highly recommending!
1. Simply press SCAN, or
Press MENU, while it shows ‘Full scan’, press the scroll knob to confirm.
After a while, the radio can scan all the DAB/DAB+ channels and add any available new
stations to the station list.
To Show the Signal Strength
During playing a DAB/DAB+ program, repeatedly press INFO until the LCD screen display
show a signal bar with the strength of the current station.
The indicator on the signal bar shows the
minimum acceptable signal level.
Note: Stations with signal strength below the
minimum signal level may not provide a
steady stream of audio.