DE Bedienungsanleitung
SICHERHEITSVORKEHRUNGEN -- Lesen Sie die gesamte Anleitung sorgfältig durch, bevor Sie das Gerät benutzen. Bewahren Sie die Anleitung zum späteren Nachschlagen auf. -- Prüfen Sie, ob die auf dem Kennzeichnungsaufkleber angegebene Netzspannung für Ihr Stromnetz geeignet ist. Aufstellort des Geräts -- Das Gerät sollte auf eine ebene, stabile Oberfläche gestellt werden, die nicht vibriert. -- Stellen Sie das Gerät nicht auf eine schräge, instabile Oberfläche, da es sonst herunterfallen könnte.
FUNKTIONEN UND BEDIENUNGSELEMENTE 1 6 2 3 4 5 7 8 9 10 11 12 6 13 14 15 1. INFO-TASTE 2. BEDIENELEMENT ZUM SCROLLEN/AUSWAHL-TASTE 3. LCD-DISPLAY 4. LAUTSTÄRKE: PLUS(+)-TASTE 5. IR-SENSOR 6. LAUTSPRECHER 7. MENÜ-TASTE 16 8. BETRIEBSARTEN-TASTE (MODUS) 9. TASTE 10. ZURÜCK-TASTE 11. LAUTSTÄRKE: MINUS(−)-TASTE 12. STABANTENNE 13. KOPFHÖRERBUCHSE 14. BUCHSE FÜR HILFSEINGANG 15. NETZWERK-ANSCHLUSS 16. ANSCHLUSS FÜR WECHSELSTROMKABEL FERNBEDIENUNG 1. ( )-TASTE 2. MENÜ-TASTE 3. (▲)-TASTE 4. (◄)-TASTE 5.
VORSICHTSMASSNAHMEN FÜR BATTERIEN Folgen Sie den Sicherheitshinweisen, falls Sie diese Fernbedienung mit einer Batterie benutzen. 1. Warnung – Explosionsgefahr falls ein falscher Batterietyp eingesetzt wird. Tauschen Sie Batterien nur gegen baugleiche Batterien aus. 2. Benutzen Sie ausschließlich Batterien der angegebenen Größe und des angegebenen Typs. 3. Beachten Sie die im Batteriefach angezeigte Polung beim Einsetzen der Batterie. Eine vertauschte Polarität kann das Gerät beschädigen. 4.
EINRICHTEN & VERBINDEN Verbindung mit dem Stromnetz 1. Verbinden Sie das Wechselstromkabel zuerst mit dem Anschluss auf der Geräterückseite. 2. Verbinden Sie das Wechselstromkabel anschließend mit der Steckdose. Netzwerkverbindung Kabelgebundenes Netzwerk 1. Überprüfen Sie zuerst, ob die Kontrolleuchten (LINK/ACT) Ihrer LAN-Verbindung bzw. Ihres Routers aufleuchten. 2.
NETZWERK Das Gerät ist mit allen gängigen Netzwerkprotokollen und Verschlüsselungsmethoden kompatibel, einschließlich WPS (Wi-Fi Protected Setup). Im Falle eines unverschlüsselten Netzwerks stellt das Gerät automatisch eine Verbindung her. Es sind dazu keine weiteren Einstellungen nötig. Verschlüsselte Netzwerke 1. Um den Netzwerkschlüssel (Passwort) einzugeben, drehen Sie das SCROLL-Bedienelement und steuern mit dem Cursor die auszuwählenden Zeichen an. Drücken Sie, um zu bestätigen. 2.
zu bestätigen. Nach der Bestätigung wird die neue Software heruntergeladen und installiert. Die Nutzereinstellungen bleiben erhalten. Hinweis: Stellen sicher, dass das Radio stabil mit dem Stromnetz verbunden ist, bevor Sie die Software herunterladen. Eine Unterbrechung der Stromversorgung während eines Software-Downloads kann zu Funktionsstörungen führen und/oder das Gerät bestätigen! Info Zeigt die Firmwareversion und Radio-ID an.
Musik-Player Im Musik-Player-Modus können Sie Audiodateien der Formate MP3, AAC, WMA oder FLAC vom Computer im lokalen Netzwerk abspielen. Der Computer muss für das gemeinsame Nutzen von Dateien eingerichtet sein, damit das Radio diese abspielen kann. UPnP-Mediensharing erlaubt es Geräten wie Ihrem Radio, Musik von gemeinsam genutzten Medienbibliotheken abzuspielen. Dabei können Sie in den Tag-Menüs nach Interpret, Album oder Genre suchen. Falls Sie einen geeigneten Medienserver nutzen, z.
UKW-Radio Im UKW-Radio-Modus empfängt das Radio analoge Radiofrequenzen des UKWBandes und zeigt, falls verfügbar, RDS-Informationen an. Um in den UKW-Modus zu wechseln, drücken Sie entweder solange auf MODE, bis das Display „FM Radio“ anzeigt, oder Sie wählen mit dem SCROLL-Bedienelement „FM Radio“ im Hauptmenü aus. Sender auswählen Um einen Sender zu suchen, drücken Sie das SCROLL-Bedienelement einmal. Das Radio sucht das Frequenzband aufwärts ab und hält automatisch an, sobald ein Sender gefunden wurde.
2. Wählen Sie die Alarmnummer (1 oder 2) aus und stellen Sie folgende Parameter ein: Aktivieren: Off, Daily, Once, Weekends, Weekdays Uhrzeit: Modus (Betriebsart): Buzzer, Internet radio, FM Voreinstellung: Zuletzt gehört oder 1–10 Lautstärke: 0–32 3. Um die neuen Einstellungen zu aktivieren, scrollen Sie mit dem SCROLL-Bedienelement das Menü nach unten und wählen „Save“ aus. Auf dem Display werden aktive Alarme mit einem Symbol unten rechts dargestellt. 4.
SCANSONIC FERNBEDIENUNGSAPP 1 Einleitung Die Scansonic Fernbedienungsapp ist eine Anwendung für iOS-Geräte. Mit der App können Radios gesteuert werden, die auf Venice 6.2, Venice 6.5, Venice 7, und Verona basieren und unter IR2.2, IR2.5, DAB 4.3 und DAB 5.0 Software laufen. Die App bietet auch einen bequemen Weg, mit dem iPhone/iPad/iPod Touch DAB/DAB+/UKW Digitalradiogeräte zu steuern, die nicht über ein geeignetes Display verfügen oder keine Internetverbindung haben.
2.2 Die Scansonic Fernbedienungsanwendung starten So starten Sie die Anwendung: Tippen Sie auf das Scansonic-Symbol im Hauptbildschirm des Smart Device. Die Scansonic-Fernbedienung startet. Es erscheint kurz ein Begrüßungsbildschirm. Falls zur Zeit kein Wiedergabemodus aktiv ist, wird der Bildschirm für die Betriebsarten angezeigt, und Sie können einen Wiedergabemodus auswählen.
Browsen Modus Hier können Sie nach Sendern und im UKW-Modus nach Radiofrequenzen suchen. Im Bildschirm für die Betriebsart wechseln Sie die Empfangsbetriebsarten (Internet radio, Music player, UKW oder AUX in). Voreinstellungen In den Modi Internetradio und UKW wählen Sie Sender aus, die als Voreinstellungen im (Preset) Radiogerät gespeichert sind.
4.1 Internetradio Zeigt im Internet verfügbare Radiosender und Podcasts an. Diese können von überall auf der Welt stammen und nach bestimmtem Kriterien, wie Standort, Genre (Art von Musik) etc., gesucht werden. Beim erstmaligen aufrufen des Internetradios werden die Optionen zum Browsen automatisch angezeigt. Bei späteren Gelegenheiten wird der Bildschirm zur aktuellen Wiedergabe für den zuletzt gehörten Radiosender geöffnet.
4.3 UKW-Radio Das Radio stellt die zuletzt ausgewählte Frequenz ein und gibt den Sender wieder. Falls vorher noch keine Frequenz ausgewählt wurde, stellt das Radio den ersten verfügbaren Sender des Frequenzbandes ein. Optionen zur aktuellen Wiedergabe Tippen Sie hier, um Folgendes zu tun: Die Zurück-Taste bringt Sie zurück zur vorherigen Bildschirmliste. Von dort aus können Sie eine Option in den Haupttabs auswählen. Wiedergabe stumm- bzw.
5 Voreingestellte Radiosender abspielen Um einen am Radio voreingestellten Sender abzuspielen, tippen Sie auf die Menüoption Voreinstellungen (Preset). Hinweis: Von einem Bildschirm zur aktuellen Wiedergabe müssen Sie die ZurückTaste benutzen, um die Haupttabs verfügbar zu machen. Die Zurück-Taste bringt Sie zum vorherigen Bildschirm des aktuellen Modus zurück. Von dort aus können Sie die Voreinstellungsoption in den Haupttabs auswählen.
7 Einstellungen Das Menü Einstellungen bietet generelle Einstellungen für das gesteuerte Radiogerät. Hinweis: Die App zeigt nur die Einstellungen an, die zu dem derzeit ausgewählten Wiedergabemodus und den Möglichkeiten des gesteuerten Radiogeräts passen. Von diesem Menü aus sind folgende Optionen erreichbar, falls verfügbar. Menü Einstellungen Option Funktion Radio Sucht nach verfügbaren Radios und zeigt eine Liste der Geräte, zu denen eine Verbindung hergestellt werden kann.