R2 USER MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG INSTRUCTIEHANDLEIDING BETJENINGSVEJLEDNING BRUKSANVISNING KÄYTTÖOHJE ISTRUZIONI PER L’USO MANUAL DEL USUARIO MANUAL DO UTILIZADOR
Contents 02CONTENTS 03INFORMATION 04FRONT PANEL OVERVIEW 05REAR PANEL OVERVIEW 06DETAILS 2
In f o r m a t i o n Congratulations on your new radio. Please take a moment to read this manual. Enjoy Safety instructions Please store this instruction manual for future reference. • Place the unit on a solid surface Unplug the radio in following cases: • Do not expose Scansonic R2 to high humidity, direct sunlight, dirt, heavy vibration or extreme temperatures. • Foreign objects or liquids has penetrated the radio • Do not open the cabinet.
Front panel 01 05 03 04 02 01OFF / FM / AM / AUX: Turn the knob one click to the right to select the FM band, two clicks to the right to select the AM band, three clicks to the right to select the AUX input. Turn the knob to OFF position to turn off the radio. The radio will power on once FM or AM or AUX mode selected and the blue illumination ring will be lit to indicate the power-on status.
Rear panel 06 05 04 03 02 01 07 01BASS REFLEX PORT TUBE: Bass reflex port tube for better sound quality. 0212v DC: Use this input to connect the Scansonic R2 DC power supply. 03HEADPHONES: Connect a separate stereoheadset to this connector to listen to the Scansonic R2 with a headset. Inserting a headset will turn off the main speaker. 04LINE OUT: Scansonic R2 can be used as a separate stereotuner by connecting it from the line out to an stereoamplifier. Use 3.5mm jack to connect radio to amplifier.
R2 details Te c h detai ls AM/FM manual tuning radio Max power: 7W Loudspeaker: 3” full range speaker Frequency response: 100Hz-20KHz Dimensions (WxHxD): 190x110x140mm F e at ur es Volume control OFF/FM/AM/AUX/selector Manual tuning Power indicator Tuning indicator Headphone output (stereo) DC power supply input jack AUX input Line out 6
enjoy w w w. s c a n s o n i c .
