Operation Manual

8
DAB Mode
 Note: When you turn on the radio it will automatically search and store all the available stations. You should
conduct an additional Full Scan to ensure all stations are picked up and stored. It is also recommended every
few months to run a new scan to pick up any new DAB/DAB+ that may have begun broadcasting after
purchasing your DAB radio.
1. For initial use, your radio will carry out a full scan and store stations list in memory.
2. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric order. The first
station in the list will be selected.
 Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to a stronger signal
area.
Shift to another DAB/DAB+ Station
While a program is playing, press Tune button to activate 'Turn to tune', and then turn Scroll/Select knob to
cycle through available stations list, press Scroll/Select knob to confirm the station you want to play.
Update Stations List
Press Menu button, turn Scroll/Select knob to select Full scan menu, and then press Scroll/Select knob to
confirm.
To Show the Signal Strength
During playing a DAB/DAB+ program, repeatedly press Info button until the display shows a signal bar with
the strength of the current station.
The indicator on the signal bar shows the
minimum acceptable signal level.
 Note: Stations with signal strength below the
minimum signal level may not provide a steady
stream of audio.