Operation Manual

17
SW Version
 Note: The helpdesk may ask you for the software version of your product.
Press Menu button, and then turn Scroll/Select knob to select SW version menu, press Scroll/Select knob to
confirm. The software version will show on the display.
Set Alarm
Your radio includes dual alarms. Setting Alarm, make sure setting time at first.
1. Press Alarm button on the unit repeatedly to select ‘Alarm 1 Setup’ or ‘Alarm 2 Setup’, press
Scroll/Select knob to confirm.
2. Turn Scroll/Select knob to select options, and then press Scroll/Select knob to confirm the setting.
Alarm states:
On or Off
Alarm time:
00:00 (manually set up the time )
Alarm duration time:
15/30/45/60/90 mins
Alarm source:
DAB, FM or Buzzer (once you selected DAB or FM as alarm source, you
need to select last listened or saved preset station to play when alarm
sounds)
Alarm active day:
Daily, Once, Weekends or Weekdays
Alarm volume:
turn Scroll/Select knob to adjust the alarm volume
3. When the display shows 'Alarm Saved', the alarm setting is successful.
4. To temporarily switch off alarm, press Snooze button to activate Snooze function when the alarm is
sounding. Press Snooze button repeatedly can set Snooze period time of 5, 10, 15 or 30 minutes in turn.
The set snooze time will show as "Snooze mm : ss" on the display.
 Note: Different Snooze period time options you can select when you selected different alarm duration time.
5. To turn off alarm, press button or Alarm button when the alarm is sounding.
6. To cancel Alarm, refer to steps1-3 to set Alarm states to ‘Off’.
Set Sleep Time
This function enables your unit to switch to standby mode by itself after a set sleep time
1. Press Sleep button repeatedly to select sleep period Sleep off, 15, 30, 45, 60 or 90 minutes. The sleep
icon will show on the display.
2. To view the set sleep time, just press Sleep button.
3. To turn the sleep function off while the sleep timer is still counting down, press Sleep button to select
'Sleep off'.