09-12-2022 (Issue 2) HS-02 Installation Instructions HS-02 Manual Hinge System Installation Instructions UK & International +44 (0)1392531280 sales@scanstrut.com For further installation and warranty information please visit: www.scanstrut.com USA +1 860 308 1416 usasales@scanstrut.
09-12-2022 (Issue 2) HS-02 Installation Instructions Parts List 1 x HS-02 Hinge Kit 4 x 60830 M8 x 30mm Bolt 1 x Base Gasket 8 x 60085 M8 Washer 2 x DS-30 Cable Seal 8 x 60731 M8 Shoulder Washer 4 x 60080 M8 Nyloc Nut Parts Required M8 x 25mm+ Length M8 Fasteners for Securing Hinge Base Tools Required Pozi Screwdriver 2 x 13mm Spanner Power Drill Ø8.5mm (0.33”) Drill Bit Ø30mm (1.
09-12-2022 (Issue 2) HS-02 Installation Instructions 1 x2 Ø30mm (1.18”) Hole Saw rd a orw F x4 Ø8.5mm (0.33”) Drill Bit Base Gasket Ma x. 25 mm (1 .
09-12-2022 (Issue 2) HS-02 3 Installation Instructions 4 13mm Spanner Radome Mounting (Refer to Specific PowerTower Instructions) 4 x 60731 M8 Shoulder Washer 4x M8 x 25mm+ Bolts (Not Included) Pozi Screwdriver 2 x DS-30 Cable Seals M8 Fixings (Not Included) 13mm Spanner *Fit provided blank bung if cable seal not being used* Waterproof Cable Routing (HS-02 + APT PowerTower Only) 1 1b 1a ø= 4mm (0.16”) Tip: freeze before drilling -18° + 1.
HS-02 5 09-12-2022 (Issue 2) Installation Instructions *Ensure sufficient slack is left on the cable/s for folding action* Self-Adhesive Foam Recommended for Resting Position (Not Included) *Ensure any externally routed cables are not pinched when folding*
HS-02 09-12-2022 (Issue 2) Installation Instructions Scanstrut Ltd. 5 Darts Business Park, Clyst St. George, Exeter, Devon, UK EX30QH Tel: +44(0)1392531280 E-mail: sales@scanstrut.com Website: www.scanstrut.
