Owner manual

Step 1: fasten the adjustable red nut and base stand clockwise.

Step 2: Remove the cable from screw and insert the interface cables

Step 3: Assemble front / back cover with MICA unit with screw.

Step 4: Attach MICA to the stand and turn it completely.

For MICA 9030

For MICA 9080i

PAGE 1
For MICA 9030 For MICA 9080i Step 1: fasten the adjustable red nut and base stand clockwise. Step 2: Remove the cable from screw and insert the interface cables Step 3: Assemble front / back cover with MICA unit with screw. Step 4: Attach MICA to the stand and turn it completely.
PAGE 2
For MICA 9030 For MICA 9080i Step 1: Remove the cable from screw and insert the interface cables Step 2: Assemble front / back cover with MICA unit with screw. Step 3: Attach MICA to the stand. Step 4: Fasten the red nut completely.