User Manual – RFR400 433MHz Router RFR400 433MHz Router User Manual Revision 02
User Manual – RFR400 433Mhz Router User Manual Revision 00 01 02 Date Description 2009.1.15 Preliminary draft 2009.3.19 2009.8.17 Copyright Champtek may have patents, patent applic ations, trademark, copyrights, or other intellectual property rights covering in this document. The provision of this information does not grant you any license to these patents, trademarks, copyrights, or other intellectual properties. FCC Statement This device complies with part 15 of the FCC Rules.
User Manual – RFR400 433Mhz Router Introduction RFR400 433MHz Router is an efficient and powerful data repeater suit for different applications. It supports both star and mesh topology that can significantly extend the coverage range. Besides, RFR400 have two mode of operation, one is auto-organized mode and the other self-assigned mode. RFR400 is suitable for non-network environment to repeat the s ignal back to reader. It can be plug and play by setting auto -organized mode.
User Manual – RFR400 433Mhz Router Specification Reader Communication Protocol Operation frequency 433.92 MHz Signal Strength Default -30dbm Range Control Adjustable RSSI range (0 to -99dbm) Modulation GFSK Read Range Omni Angle Antenna 90m Physical Characteristics Length Width Height Weight Case 4.89” 3.09” 0.
User Manual – RFR400 433Mhz Router Mechanicals TOP View Power LED – On when reader is powered. TX/RX LED – On while reader is transmitting or receiving a packet. Antenna – SMA connector Power – 5Vdc Reset Button – Hardware Reset the Router Packet Format Head Reader ID # First Tag Router ID Group 000000 000000 ~999999 ~999999 0~63 Tag ID 000000 ~999999 Tag First Tag End Status Router RSSI Data Code * 00~99 ** * “Status” indicates the tag ’s condition such as moving, still, etc.
User Manual – RFR400 433Mhz Router Implementation Notice Keep away from potential RF radiators such as electronic / radio equipments for minimizing inte rference, i.e. engine, monitor etc, utilize the channel clear detection feature to pre -scan the interference and then choose the best place to setup the reader. And readers should be mounted at reasonable height for better performance.
