SG300RFM WIRELESS HAND HELD SCANNER User Manual
We Value Your ID’s. HQ CHAMPTEK INCORPORATED 5/F, No.2 Alley 2, Shin-Wei Lane, Chung Cheng Rd., Hsin Tien City 231, Taipei, Taiwan Tel:+886-2-2219-2385 Fax:+886-2-2219-2387 E-mail:sales@champtek.com www.champtek.com CHINA CHAMPTEK INCORPORATED #901, No. 39, Wuzhong Rd., Shanghai 200235, China Tel: +86-21-5489-0021 Fax: +86-21-5489-1833 EMEA SCANTECH-ID BV Amersfoortsestraat 124 3769 AN Soesterberg The Netherlands Tel:+31-33-4698400 Fax:+31-33-4650615 E-mail:info@scantech-id.com www.scantech-id.
Content 1.Safety & Caution .................................................................... 1 2.FCC Warning.......................................................................... 2 3.Introduction............................................................................. 3 3.1 Product Description.....................................................3 3.2 Shipment Package ......................................................3 3.3 Product Portfolio.....................................................
Safety & Caution 1 1. Please read the following safety statement carefully. 2. Please preserve this user manual for reference sometime. 3. Before cleaning SG300RFM, the users must cut off all AC power. Do not use liquid or spray type of detersive to clean SG300RFM. Please use dampish cotton cloth to clean SG300RFM. 4. The outlet must be set nearby SG300RFM for connecting power easily. 5. 6. Keep SG300RFM dry to avoid short circuit.
2 FCC Warning This equipment complies with the requirements in Part 15 of FCC. Any operation must complies with the conditions below: (a) The equipment will not cause any severe interference. (b) The equipment can avoid any interference from environment. Statement: This product is classified as A class product. In environment this product may cause some interference. In this situation the user may do something to avoid interference.
3 Introduction 3.1 Product Description This wireless hand-held long-range CCD scanner features a freedom of scanning without the limitation of cable. Thanks to the user-friendly two-way communication, the operator will be alarmed if the scanned result was not reached the receiving Cradle. With the most advanced narrow-band RF technology, this scanner can be operated at 15 Meters range(Open space) and features one Cradle that supports multiple scanners (Maximum 8 scanners).
3.
3.5 Cradle Installation To The Host Device RS232 1. Turn off the host device. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the cradle. 3. Connect the 9-pin D-type Female connector of the RS232 cable to the proper COM port of the host device. 4. Plug the external power supply into the power jack on the bottom of the cradle. 5. Plug the power supply into the AC outlet. The red LED on the rear of the cradle will stay on. 6. Turn on the host device.
Keyboard Wedge 1. Turn off the host device. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the cradle. 3. Disconnect the keyboard from host. 4. Connect the “Y” ends of the communication cable to the keyboard and keyboard port on the host device. If necessary, use the male/female adapter cable supplied with the scanner for the proper connections. 5. Plug the external power supply into the power jack on the bottom of the cradle. 6.
USB 1. Turn off the host device. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the charger cradle. 3. Connect the USB A type connector to the USB port on the host device. 4. Plug the power supply into the power jack on the bottom of the cradle. 5. Plug the power supply into the AC outlet. The red LED on the rear of the cradle will stay on. 6. Turn on the host device. 7. Establish communication between the scanner and cradle.
3.6 Cradle/Dongle Installation Skip resistant Pad position. Connect cable and adaptor and lock up the iron panel. The other side of cable will be connected with Host PC. Lock the iron panel of Cradle by screwdriver. .
3.7 Indicator Status Operating status of LED and Sound indicator is shown as below. Light SIGNAL STATUS 1 Blink and 1 beep Good Read Good Read 2 Blink and 2 beeps Green But Transmit Fail a) Scanner 4 Blink 2 times and 4 Battery Need To Charge beeps 2 times Continuous on In Charging Red Off Charging Finished Light SIGNAL STATUS 1 Successful Green Transmission Follow Good Transmission with 1 Blink b) Receiver Red Continuous on Power on 1 Failed Yellow Transmission Follow Failed Transmission with 1 Blink 3.
4 Specification Electrical Characteristics Supply Voltage Battery Type Recharge Time a) Scanner b) Receiver Operating Current Draw Power On (Typ.) Stand by (Typ.) Operation (Typ.) Supply Voltage Current Draw Power On (Typ.) Stand by (Typ.) Operation (Typ.) DC +3.7V ±5% Li-ion battery (1100mAh) 5 Hours 30,000 times scan at continuous mode 180mA 0.1mA 180mA DC +5V ±5% 60mA 60mA 60mA Performance a) Scanner Characteristics Light Source Sensor Processor Type Operating Freq.
Readable Symbologies Readable Default Enable All UPC/EAN/JAN V V EAN128 Code V V Code 39 V V Code 39 Full ASCII V Code32 / Italian Pharmacy V Code 128 V V CODABAR/NW7 V V Interleave 25 V V Industrial 25 V Matrix 25 V MSI/PLESSEY V Telepen V Code 93 V Code 11 V China Postage V RSS-14 V RSS Limited V RSS Expanded V Reliability Life Time Light Source 40,000 hours Trigger Switch 1,000,000 times MTBF(Calculated) N/D Thermal Shock High Temp. 50 oC (122 oF) Low Temp.
12
SG300RFM 無線手持式條碼掃瞄器 操作說明書 0
We Value Your ID’s. 總公司/工廠/營業處 (亞洲) 阿丹電子企業股份有限公司 臺灣台北縣新店市(231)中正路四維巷 2 弄 2 號 5F Tel:+886-2-2219-2385 Fax:+886-2-2219-2387 E-mail:sales@champtek.com www.champtek.com 營業處 (中國區) 阿丹貿易(上海)有限公司 中國上海市徐匯區吳中路 39 號 901 室(郵編 200235) Tel: +86-21-5489-0021 Fax: +86-21-5489-1833 分公司/營業處 (歐洲) SCANTECH-ID BV Amersfoortsestraat 124 3769 AN Soesterberg The Netherlands Tel:+31-33-4698400 Fax:+31-33-4650615 E-mail:info@scantech-id.com www.scantech-id.
目 錄 1.安全注意事項.......................................................................... 1 2.FCC 安全警告......................................................................... 2 3.產品介紹 ................................................................................. 3 3.1 產品說明 ......................................................................3 3.2 出貨說明 ......................................................................3 3.3 組合方式 ......................................................................3 3.
1 安全注意事項 安全與警告 1. 請仔細閱讀以下安全說明。 2. 請保存好此使用手册以供日後参考。 3. 在清潔本產品之前,首先要切斷所有電源,不要用液體或是 氣體清潔劑進行清洗,使用微濕的棉布清潔即可。 4. 電源插座必須安裝在本產品附近,以方便接通電源。 5. 保持設備乾燥,以防潮濕。 6. 安裝過程中,須將本產品放置在穩定的桌面,若發生跌落將 會造成損壞。 7. 在連接電源之前請確認產品使用電壓與電源電壓是否相同。 8. 請將電源線綁好,以防止被踩到,不要在電源線上放置任何 物體。 9. 請認真閱讀產品上的任何小心和警告内容。 10. 如果長時間不使用本產品,請切斷電源以防瞬間高壓衝擊造 成損害。 11. 請不要在機器上倒任何液體,因為可能導致火花或是電源短 路。 12. 請不要拆卸本產品,基於安全的原因,只有專業資格的維修 人員才能拆卸本產品。 13.
2 FCC 安全警告 依據 FCC 規範的第 15 部分,本產品已經過測試並符合 Class A 裝 置之限制要求。 這些限制是設計用來提供合理的保護,以避免居住環境遭受電波 干擾傷害。此裝置產生、使用並能夠散發無線電頻率能量,若是 未依照指示進行安裝或是使用時,可能會引起電波通信干擾的問 題產生。然而,我們並不保證在某些特定安裝情況時,將不會發 生干擾問題。 FCC警告: 更改或是變更此裝置是不被允許的,因為契約中 的承諾可能會造成使用者喪失操作此裝置的權 力。 2
3 產品介紹 3.1 產品說明 SG300RFM 是一組長距離無線掃瞄器,因應時下企業使用者對於 移動操作的需求,SG300RFM 採用最先進的 RF 無線技術,可無線 雙向通訊,一組接收器最多可接收 8 組手持式條碼掃瞄器,在開 放空間無干擾環境中最大接收距離可達 15 公尺。 SG300RFM 整合接收器與充電裝置於一體,同時預留了掃描器直 接充電的選擇,更貼近使用者的操作上的需求。 (P.S. 第一次使用請充電 8 小時以上) 3.2 出貨說明 SG300RFM 包含接收器、掃描器與充電座,可依使用者不同需求 選擇與搭配,標準出貨之內容描述如下: 標準出貨包裝: A.主機: (a) 手持式無線掃瞄器(內附鋰電池 x1) (b) 無線接收充電座 (c) 電源供應器(AC In 90V~264V,47~63Hz / DC Out 5V / 1.2A) (d) 設定手冊 (e) 操作說明書 (f) 線材 (RS232, Keyboard, USB 介面任選一種) B.
3.
3.5 連線方式 RS232 A. 將連接之電腦(裝置)電源關閉。 B. 連接傳輸線(RJ-45 接頭)接於充電座下方右側連接座上。 C. 將 9 Pin 的 RS232 接頭接於要連接之電腦 COM Port 上。 D. 將電源供應器接頭連接於充電座下方左側連接孔上。 E. 待所有線材都連接上後,將電源供應器插上電源,充電座 LED 紅燈則會亮起,表示功能正常。 F.
Keyboard Wedge A. 將連接之電腦(裝置)電源關閉。 B. 連接傳輸線(RJ-45 接頭)接於充電座下方右側連接座上。 C. 將鍵盤之 PS/2 接頭從電腦端拔除。 D. 將 Y 型線其中一端接上電腦,另一端接上剛拔除之鍵盤線。 E. 將電源供應器接頭連接於充電座下方左側連接孔上。 F. 待所有線材都連接上後,將電源供應器插上電源,充電座 LED 紅燈則會亮起,表示功能正常。 G.
USB A. 將連接之電腦(裝置)電源關閉。 B. 連接傳輸線(RJ-45 接頭)接於充電座下方右側連接座上。 C. 將傳輸線另一端連接於電腦(裝置)上之 USB 插孔。 D. 將電源供應器接頭連接於充電座下方左側連接孔上。 E. 待所有線材都連接上後,將電源供應器插上電源,充電座 LED 紅燈則會亮起,表示功能正常。 F.
3.6 接收器/充電座蓋板安裝方式 首先於掃描器窗口下貼上防滑墊.
3.7 燈號及警示音說明 於操作中燈號及警示音說明如下: 顏色 動作說明 綠 1閃 +1響 綠 2閃 +2響 a) 掃描器 綠 4閃2次 +4響2次 紅 恆亮 紅 熄滅 顏色 動作說明 綠 1閃 b) 接收器 紅 恆亮 黃 1閃 狀態 讀取正常 讀取正常但傳輸失敗 電力不足,需要充電 鋰電池充電中 充電完畢 狀態 傳輸正常 待機中 傳輸失敗 3.8 工作環境需求 軟體需求 作業系統:win 98 / 2000 / XP / Vista 硬體需求 (a) 介面:RS232,KBW,USB (b) 電源輸入:DC 5V P.S.
4 產品規格 Electrical Characteristics Supply Voltage Battery Type Recharge Time a) Scanner b) Receiver Operating Current Draw Power On (Typ.) Stand by (Typ.) Operation (Typ.) Supply Voltage Current Draw Power On (Typ.) Stand by (Typ.) Operation (Typ.) DC +3.7V ±5% Li-ion battery (1100mAh) 5 Hours 30,000 times scan at continuous mode 180mA 0.1mA 180mA DC +5V ±5% 60mA 60mA 60mA Performance a) Scanner Characteristics Light Source Sensor Processor Type Operating Freq.
Readable Symbologies Readable Default Enable All UPC/EAN/JAN V V EAN128 Code V V Code 39 V V Code 39 Full ASCII V Code32 / Italian Pharmacy V Code 128 V V CODABAR/NW7 V V Interleave 25 V V Industrial 25 V Matrix 25 V MSI/PLESSEY V Telepen V Code 93 V Code 11 V China Postage V RSS-14 V RSS Limited V RSS Expanded V Reliability Life Time Light Source 40,000 hours Trigger Switch 1,000,000 times MTBF(Calculated) N/D Thermal Shock High Temp. 50 oC (122 oF) Low Temp.
Ver 1.