OIL HEATER Instruction manual SC-1152 SC-1153 SC-1154
DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8. Panel Thermostat knob Power switch knob Cord wrap Cord Wheel assembly Heater unit Front cover IMPORTANT SAFEGUARDS When using the appliance, basic safety precautions should always be followed: · Please read this instruction manual carefully before use. · Home use only. Do not use for industrial purposes. · Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
ASSEMBLING · · First put the unit upside down. Install multidirectional rolling wheels to each end between the first and the second groups of the radiating flanges. · Let the shape screw surrounding the dome of the radiating flanges. Then insert it into two holes of the supporting plate. · Insert the butterfly nuts and screw them tightly counter clockwise. USING THE APPLIANCE · Set the thermostat to the minimal position and power switch knob to the the plug to the power supply.
CLEAN AND CARE · · · · The oil heater should be cleaned regularly to wipe out the dust on the surface of fins. As this may result the radiating efficient. Unplug from the power supply and allow the appliance to cool down. Wipe out with a soft damp cloth. Do not use detergent or abrasives. Do not scrap the surfaces of fins with sharp hard tools, to avoid surfaces getting rusty, because of damage of the paint coat. STORAGE · · Ensure the oil heater is completely cool.
1. 2. 3. 4. 5. 6. 7. 8. : · · . . . · , , . · , . . · , . · · · · · . . . . . , . · · . , . · · . . · , .
: · · . . · · . , . · . · . , ! · , , . · , - II - III : ; ; ; . · · . , , , . . · : - , II . · , . : · · , . , .
· , . . . · · . . . · , . . . · · . , .