User's Manual

◆AV-IN MODE

To start AV-IN Mode, tap on AV-IN button from main menu screen.

Connect the external audio/video signal source to this unit. Select AV-IN mode in the main

menu or by pressing repeat Mode button on the front panel.

Note: If there is no external video input, the TFT displays “NO SIGNAL”.

Press the icon to be back to main menu.

◆SETTING CONTROL

Your device has default system settings. You can customize the settings to suit your personal

needs. Once you change settings, your new settings will remain until you change it again.

To start SETTING, tap it on main menu screen.

SOUND CONTROL

Tap SOUND button to show SOUND 1 menu.

Tap button to show SOUND 2 menu.

Tap button to show SOUND 3 menu.

EQ Select EQ mode

BAS LEVEL Bass up/down

TRE LEVEL Treble up/down

BALANCE Left/Right Balance Control

FADER Front/Back Fader Control

BEEP Set keypad sound on /off

LOUDNESS Set loud on /off

LOUD LEVEL Adjust loud level

SUBWOOFER Set subwoofer on /off

SUBW LEVEL Adjust subwoofer level

SUBW LPF Select a subwoofer crossover

option: 80HZ,120HZ,160HZ