Dear Sceptre Customer, Congratulations on your new SCEPTRE X505BV-FHD HDTV purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your TV, please read the manual carefully before making any adjustments, and keep them in a safe place for future references. We hope you enjoy your new SCEPTRE HDTV. For technical assistance, please call 1800-788-2878 and select option 3 or email our tech support group at monitor-ts@sceptre.com.
IMPORTANT INFORMATION -2www.SCEPTRE.
SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
SAFETY INSTRUCTIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
• • • • • • • • • Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be installed near the equipment and should be easily accessible. Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock. Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.
IMPORTANT INFORMATION Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Opening the Package The SCEPTRE TV is packaged in a carton. Any standard accessories are packed separately in another carton. The weight of the TV is approximately 49.38 lbs. Due to the size and weight of the product, it is suggested that it must be handled by a minimum of 2 or more persons. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding.
Attaching or Removing the Stand 1. To attach the base place the display unit flat on a table. Afterwards attach the stand onto the display and attach the metal plate to the bottom of the stand. Screw in the 6 screws to secure the stand. -8www.SCEPTRE.
2. To remove the stand, remove the 6 screws in the area and the stand will come off. -9www.SCEPTRE.
Table of Contents IMPORTANT INFORMATION ............................................................................................................. 2 SAFETY INSTRUCTIONS ................................................................................................................... 3 SAFETY INSTRUCTIONS ................................................................................................................... 4 IMPORTANT INFORMATION ..............................................................
Identifying Front and Rear Panel Front View INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The light turns blue when the TV is turned on. Because of the LCD in the panel, the TV might take 10 – 12 seconds to power on. REMOTE SENSOR – The remote sensor receives all the commands from the remote control. Rear View Mounting Pattern Mounting Specification : 400mm x 400mm using screw size M5. Length of screw should not exceed 10mm.
Side Control Buttons 1. 2. 3. 4. 5. 6. 7. VOL(+) – This button increases the TV’s volume. If a sub-menu is active, pressing this button will move the select right. VOL(-) – This button decreases the TV’s volume. If a sub-menu is active, pressing this button will move the selection left. CH(▲) – This button changes the TV channel up. If the OSD is active, this button functions as up for the menu. CH(▼) – This button changes the TV channel down.
Rear View Connections 1. 2. 3. 4. 5. 6. SPDIF - This connection port is used for sending out digital audio signals to digital surround sound receivers. The orange (COAX SPDIF OUT) connector sends out either bit-stream or PCM digital sound signal to a home theater receiver with digital coax input. TV – This connection is for digital or analog cable without the cable box or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels.
YPbPr – This connection port is for DVD players or satellite / cable settop boxes that use component cables. From left to right, connect green, blue, and red for video, and then connect white for left channel audio, and red for right channel audio. 8. Video – Video connects to devices that use composite video cables such as VCR or DVD player or Wii™. Connect the yellow for video and the red / white for audio. 9. Analog Audio Out – This connection is for connecting to analog audio receivers. 10.
SCEPTRE Remote Control This remote control follows SONY’s universal remote code. To find the actual code you need to consult your cable or satellite tech support. - 15 www.SCEPTRE.
For universal remotes, this TV follows SONY’s universal remote code. You need to find the actual code from your cable or satellite or universal remote provider. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. POWER – Turns the TV on or off. FREEZE – Freezes the TV picture. SLEEP – Sets the Sleep timer. CC – Cycles between different closed captioning modes. MTS – Selects stereo, mono, or second audio programming.
Connection Suggestions If You Have Digital Cable without Cable Box or Antenna… 1. 2. Make sure the power of HDTV is turned off. Connect the Coaxial RF cable from your antenna or digital cable to the TV port on the back of your HDTV. 3. 4. Turn on the HDTV. Follow the first time on screen instructions. Please Note: • • Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information.
Connecting DVD Player with Component YPbPr… 1. 2. 3. 4. 5. 6. 7. 8. Make sure the power of HDTV and your DVD player is turned off. Obtain a Component Cable. Connect the green color connector to both your DVD player and YPbPr’s green connector port on the back of your HDTV. Connect the blue color connector to both your DVD player and YPbPr’s blue connector port on the back of your HDTV. Connect the red color connector to both your DVD player and YPbPr’s red connector port on the back of your HDTV.
Connecting Wii™ with Composite… 1. 2. 3. 4. 5. 6. Make sure the power of HDTV and your Wii™ is turned off. Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your Wii™ and AV’s Yellow Video connector port on the back side of your HDTV. Obtain a RCA Audio Cable. Connect the white color connector to both your Wii™ and AV’s white connector port on the back side of your HDTV. Connect the red color connector to both your Wii™ and AV’s red connector port on the back side of your HDTV.
Connecting Cable or Satellite boxes with HDMI… 1. 2. 3. 4. Make sure the power of HDTV and your set-top box is turned off. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port on the back of your HDTV. Turn on the HDTV and your set-top box. Use the remote control’s source button or the source button on the TV to switch to HDMI. Please Note: • • Please reference the set-top box’s manual, to make sure the settop box is configured to output correctly to the TV.
Connecting to a PC with VGA and 3.5 mm minijack … 1. 2. 3. 4. 5. 6. 7. 8. 9. Make sure the power of HDTV and your PC is turned off. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other end to the VGA port on the back of your HDTV. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the VGA Stereo Input port. Turn on the power of the HDTV and your PC. Use the remote control’s source button or the source button on the TV to switch to PC.
Connecting a Digital Audio Receiver with Coax SPDIF… 1. 2. 3. Make sure the power of HDTV and your receiver is turned off. Obtain a coax SPDIF cable, connect it to your receiver’s coax SPDIF digital input and the coax SPDIF connection on the LINE OUT port on the back of the HDTV. Turn on the HDTV and your receiver. Please Note: • • • • If you want pure digital stream for your receiver to decode, you must also configure the TV’s OSD Sound->Digital Audio Out function. Make sure the option is on 5.1CH.
Switching Sources 1. Press the SOURCE button on the right of the TV to switch sources. - 23 www.SCEPTRE.
Ready to Watch Some TV? Starting up the HDTV 1. 2. 3. 4. Make sure your power cable is connected and the standby red light in the front of the TV is lit up. Check all your connection cables off the side or the back of your TV and also your AV devices. Make sure they are all connected securely. Turn on your TV and other AV devices if necessary. Select the correct source according to the Connecting pages.
OSD (On Screen Display) Controls Via Remote Control In order to adjust most of the options inside the On Screen Display (OSD), the picture below shows all the buttons used on the remote control. ▲ – This button changes the channel to a higher number and also functions as up direction in the OSD. ▼ – This button changes the channel to a lower number and also functions as down direction in the OSD. ◄ – This button decreases the volume and also functions as left direction in the OSD.
OSD (On Screen Display) Options PICTURE – This main option has functions for changing the picture settings for all ports, such as tint, contrast, sharpness. SOUND – This main option has functions for changing sound settings for all ports, such as SPDIF Type, treble, bass, and acoustic cinema enhancement….etc. CHANNEL – This main option has functions for the tuner port, such as scanning channels, editing channels, specific range scans, audio language, tuner mode….etc.
1. 2. 3. Press MENU to open the OSD. Press ◄ or ► to select PICTURE and press ENTER. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. PICTURE SETTINGS i. II. III. IV. PICTURE MODE – This feature changes various color and power saving modes for the TV. ii. BRIGHTNESS – This feature changes the picture’s detail in dark colors. iii. CONTRAST – This feature changes the difference between dark and bright objects. iv.
V. ADVANCE PICTURE SETTINGS i. ii. iii. iv. DYNAMIC CONTRAST – This feature allows the TV to automatically adjust the contrast of the TV depending on the picture you are viewing. FILM MODE – This feature is 24p that syncs with DVD movies, and should be enabled when viewing DVD video to allow smoother frame rate. NOISE REDUCTION – This feature reduces general pixilation by blurring them. MPEG NOISE REDUCTION – This feature reduces DVD video pixilation by blurring them.
SOUND This option allows users to adjust the TV’s sound functions. 1. 2. 3. Press MENU to open the OSD. Press ◄ or ► to select SOUND and press ENTER. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. SOUND SETTINGS i. ii. iii. SOUND MODE – This feature switches between preset settings (presets include standard, soft, user, and dynamic). BASS – This feature adjusts the audio bass level of the TV. TREBLE – This feature adjusts the audio treble level of the TV.
iv. II. III. IV. V. BALANCE – This feature adjusts the balance between the two speakers moving sound from left to right. SURROUND MODE – This feature enables the TV two speakers to provide a wider sound effect. ANALOG SOUND – This feature adjusts the second audio programming in analog channels. DIGITAL SOUND – This feature adjusts the digital second audio programming in digital channels. OTHER SETTINGS i. VI. VII.
i. ii. iii. iv. TRUSURROUND – This option enables SRS TRUSURROUND sound effect. DIALOG CLARITY – This option enhances the TV program’s human voice clarity. TRUBASS – This option enhances the TV sound’s bass level. DEFINITION – This option enhances the TV sound’s general effects. is a trademark of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. Please Note: • Second audio programming is dependent on the support of the TV station you are watching.
CHANNEL This option allows user to adjust the TV’s tuner functions. 1. 2. 3. Press MENU to open the OSD. Press ◄ or ► to select CHANNEL and press ENTER. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. CHANNEL LIST – This feature gives you the list of channels currently found by the TV. II. FAVORITE LIST – This feature gives the favorite list of channels added. III. CHANNEL SETTING i. ii. IV. V. CHANNEL NUMBER – This feature shows the channel number.
PARENTAL This option allows users to filter TV programs and movies while using the TV tuner. To use this option you will need to enter in the password first. 1. 2. 3. Press MENU to open the OSD. Press ◄ or ► to select PARENTAL CONTROL and press ENTER. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. LOCK PARENTAL CONTROL – This feature allows you to input a password in order to access the other features. (The default password is “0000”) II.
SETUP This option allows user to adjust the TV’s miscellaneous options. 1. 2. 3. Press MENU to open the OSD. Press ◄ or ► to select SETUP and press ENTER. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. CLOSED CAPTION – This provides your TV tuner, AV ports with subtitles. i. CAPTION DISPLAY – This turns on or off the closed captioning. ii. ANALOG CAPTION TYPE – This chooses the subchannel that supplies the closed captioning.
c) II. III. IV. CC OPACITY – This changes the transparency of the captioning. d) CC COLOR – This changes the color of the text. e) CC BACKGROUND OPACITY – This changes the transparency of background of the text. f) CC BACKGROUND COLOR – This changes the color of the background. MENU LANGUAGE – This function adjusts the language of the menu (English, French, Spanish). CLOCK i. TIME ZONE – This adjusts the time zone for the TV’s clock. ii. AUTO CLOCK – This feature sets the TV to the TV channel’s clock.
OTHERS This option allows users to set other features of the TV. 1. 2. 3. Press MENU to open the OSD. Press ◄ or ► to select OTHERS and press ENTER. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. BLUE BACK – This feature gives the TV a blue default background when there is no signal. NO SIGNAL POWER OFF – This feature turns the TV off if there is II. no signal given to the TV after a certain time. III.
Detailed Explanations USB Connection Explained The TV is a widescreen TV with an USB port. With the USB port the TV can access USB flash drives (up to 2GB) and display pictures or play MP3 files. To use this feature connect a USB flash drive to the USB port of the TV and press the USB button to start browsing for music and pictures. Once you press the USB button the USB menu will come up. Select either the music or picture you want to browse using the arrow buttons.
Media Setting 1. 2. 3. 4. 5. 6. SLIDESHOW INTERVAL – This option adjusts the time interval of a displayed picture. SLIDESHOW EFFECT – This option adjusts the video effects when pictures interchange. SLIDESHOW REPEAT – This option toggles the repeat function for displaying pictures. MUSIC PLAY MODE – This option adjusts the music playing option. MUSIC PLAY REPEAT – This option toggles the repeat function for playing music.
Closed Captioning (digital and analog) Explained Your TV is equipped with an internal Closed Caption decoder. It allows you to view conservations, narration and sound effects as subtitles on your TV. Closed Captions are available on most TV program, and on some VHS home video tapes, at the election of the program provider. CC – Press this button to enable the CC function. You can then use the ▲▼ buttons to select if you want CC off or CC on.
TV-G (USTV) – General Audience Most parents would find this program suitable for all ages. Although this rating does not signify a program designed specifically for children, most parents may let younger children watch this program unattended. It contains little or no violence, no strong language and little or no sexual dialogue or situations. TV-PG (USTV) – Parental Guidance Suggested This program contains material that parents may find unsuitable for younger children.
Aspect Ratio Explained The TV is a widescreen TV, but most TV programs are still broadcasting in a square format, therefore the TV is offering multiple ways of viewing videos. There are mainly two types of signal format, Full (16:9 format), Normal (4:3 format), while others offer a novelty ways to view the TV. Simply use the ASPECT button on the TV’s remote control to cycle between the multiple modes. 1. NORMAL Most analog TV channels have 4:3 signal formats. If the original 4:3 aspect ratio (1.
Shortcuts to Browsing Channels Browsing through the entire channel list on the TV can be tedious. This TV features a favorite channel list, where you can add in channels that you always want to watch TO ADD TO THE FAVORITE LIST 1. 2. Go to any channel you would like to include in your favorites list. Press the ADD/DEL button on the remote control. You will see a (FAV) on the INFO banner denoting that this channel is in the favorites list. TO DELETE FROM THE FAVORITE LIST 1. 2.
How do I clean the TV ? IMPORTANT 1. 2. The power cable has to be removed from the socket before cleaning the TV. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These types of chemicals might damage the housing and the LCD glass. Cleaning the bezel and remote control 1. 2. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
Troubleshooting The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians. Problems Solutions Connect power cord correctly. Turn on power. NO PICTURE Connect video cable correctly. Select the input signal source with proper cable connection with the source button. ABNORMAL Match the colors on the cables to the ports off the back of the COLORS television. I.E. red cable to red colored port.
Problems Solutions TV CHANNELS ARE Check your auto lock function’s settings inside the OSD. You BLOCKED may have locked up some channels but forgot about them. Refer to page 34 for more instructions. UNIVERSAL This TV follows SONY’s universal remote code. Please check REMOTE CODE your hand book for SONY’s codes then apply them. THE TV TURNS ON This TV is a High Definition liquid crystal display panel TV.
Problems SWITCHING A CHANNEL OR SOURCE CHANGES THE VOLUME Solutions Different channels and inputs will sometimes have this effect because the channel signal’s own volume is already loud. There is no way remove this completely. The TV has an AUTO VOLUME LEVEL function that can combat this type of effect. Please make sure that function is turned on.
Call Us If You Need Help! Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone or email. For more information on warranty services or repairs after the warranty period, please contact our support department at the number below. For technical help, contact our Sceptre Technical Support Group via email or phone.
Specification Display panel Item Illustration Active Area / Screen Size Diagonal 50 inches Aspect Ratio Widescreen 16:9 Pixel Pitch 0.1903 (H) x RGB x 0.5708 (V) um per one triad Max. of Pixels (Resolution) HD (1920 x 1080 pixels) resolution Brightness 350 nits (Typical) Contrast 4000:1 (Typical) with Auto Contrast Enhancement Response Time 8 ms (gray to gray) Viewing Angle Typical 176/176 Degree (Horizontal/Vertical) Lamp Life of Backlight > 50,000hrs TV DISPLAY Dimension 46 × 28 × 4.
SPDIF Out Yes (coax) Speakers 10 watt per channel (3) General Hybrid TV Tuner NTSC / ATSC / QAM (Digital Cable Ready) Channel auto scan Yes Sleep timer Off / 10mins / 20mins / 30mins / 40mins / 50mins / 60mins / 90mins / 120mins Standby power Under 1W Timing support-Video 480i / 480p / 720p / 1080i / 1080p PC timing 1920x1080@60 Hz (NATIVE) 1024*768@60, 70, 75Hz 800*600@60, 75Hz 640*480@60, 75Hz Multimedia Format Audio: MP3 (32-48Khz) Picture: JPEG (Baseline) up to 5000x5000 USB file system
LIMITED PRODUCT WARRANTY Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized Reseller, only on new and non-refurbished product, and available to customers in the Continental US, Alaska, Hawaii and Puerto Rico. See below for the SCEPTRE Extended Service warranty. SCEPTRE’s Responsibility SCEPTRE units purchased from an authorized SCEPTRE U.S.
defect; or displays on which the serial number has been removed or defaced. Image Sticking caused by operating at excessive brightness levels for extended periods or mishandling are not covered by this warranty. Installation, removal, transportation and reinstallation of a display and routine maintenance and cleaning, are not covered by this warranty. Any hardware, components, and/or software bundled with the display are not covered by this warranty.
Disclaimer, Trademarks, & Copyright Information • “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Liscensing LLC.” • Xbox 360 ™ is a registered trademark or trademark of Microsoft Corporation in the United States and other countries. • Playstation® 3 is a registered trademark or trademark of Sony Computer Entertainment Inc. in the United States and other countries. • Wii™ is a registered trademark or trademark of Nintendo of America, Inc.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that my cause undesired operation. Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.