X20WG-Naga User’s Manual
FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
To comply with the limits for an FCC Class B computing device, always use the shielded signal cord supplied with this unit. The Federal Communications Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
TABLE OF CONTENTS TABLE OF CONTENTS ..........................................................................................
The LCD Monitor Your New LCD Monitor Your LCD Monitor has been designed to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of displaying most standards, from 640x350 VGA to 1680x1050 WSXGA+. The digital controls located on the front panel allow the user to easily adjust the Monitor’s display parameters, and the LCD Monitor’s small footprint gives you more room in your workspace for other peripherals. Lightweight and compact, the LCD Monitor is the perfect solution for users on the go.
Note: Using a computer for an extended period of time with a poor workstation set-up and incorrect working habits can cause health problems. The science of ergonomics studies the relationship between health and a suitable working environment. There is a section on ergonomics at the end of this chapter. For more information on ergonomics, contact your nearest computer bookstore, or local library. The Internet also has information on this and other subjects.
Identifying Components A. The LCD Monitor — Front View 3 1 2 4 Figure 1-1: The LCD Monitor Front View 1. Sceptre logo Indicator This foursquare LED indicator blue lit when the power is on and red lit when the LCD monitor is in power-saving mode. 2. Monitor Stand 3. LCD Screen The LCD monitor is a 20.1-inch TFT 1680 x 1050 Wide WSXGA+ screen. 4. LCD Monitor Control Panel Refer to Chapter 2 for more details. 3 Rev.
B. "Hot Keys" for Quick Adjustment of Monitor Settings Figure 1-2: "Hot Keys" 1. Brightness adjustment " Hot Key ": Press this Z button to allow you to adjust the brightness of the LCD Monitor directly < > 50 2. Source select “ Hot Key : Source D-Sub Press S button to allow you to change the input source between DVI port and RGB port, if the screen can’t detect signal, then it will switch to the next automatically Source DVI 3.
Adjusting the Tilting Angle The LCD Monitor’s angle settings range from 0° to 10°. 10 10 0 to Figure 1-3: Tilting the Monitor 5 Rev.
Connecting AC Power and PC Video Cable Note: Turn off your PC and the LCD monitor before connecting your LCD monitor to the computer. AC-IN Audio DVI VGA AC Outlet (Wall Socket) Monitor Power Cord Figure 1-4: PC conenction Power Management System This LCD Monitor complies with the VESA DPMS power management proposal. When the LCD Monitor is in power-saving mode or detects an incorrect timing, the monitor screen will be blank and the power LED indicator change to red lit. 6 Rev.
How to install the detacheable stand: Please see the below drawing. 7 Rev.
The Display Controls The LCD Monitor’s Control Panel Figure 2-1: The Control Panel 1. 2. 3. 4. 5. Hot key button Y &Z These buttons let you to adjustment volume and brightness of the LCD Monitor directly Cursor Movement & Adjustment button - & + These buttons let you move vertical across your settings item or to change the setting value.
Adjusting the Monitor’s Display OSD Main Menu 1. Pressing the OSD Menu button causes the screen below to appear. 2. Use the - & + key to select the desired group, then press Menu key to the sub-menu 3. Repeat step 2 to select the changed item, then press - & + to change the value. 4. Move to Exit item, Press the Menu to return to the sub-menu item 3 to another adjustment The OSD Main Menu OSD Main SCREEN 9 Rev.
Auto Adjust Option The Auto Adjust option lets the monitor determine and select the settings that are most appropriate for your system requirements. Note: it only apply for Analog RGB input Luminance -- Brightness and Contrast Adjustment. Brightness -- Adjusts the Brightness value Contrast -- Adjusts the Contrast value Exit -- Return to the previous Menu Geometry -- Display Quality Adjustment ( For VGA port only, DVI port can’t adjustment ) H. Position -- Moves the whole screen right or left V.
Color -- Color Temperature Adjustment Auto Color -- To adjust automatically the white balance display.
OSD – OSD Adjustment H. Position -- Moves the OSD menu horizontally V. Position -- Moves the OSD menu vertically OSD Time -- Sets the OSD time ( 0 to 60 second ) Exit -- Return to the previous Menu Language -- The supported languages include English, French, German, Italian, Spanish, Japanese, Traditional Chinese and Simple Chinese Recall Color Recall -- To reset the color settings to the factory default. Recall All -- To reset the entire settings to the factory default.
Miscellaneous Input selection -- To switch between analog and DVI port for PC signal input Sharpness -- The sharpness value can be set at 1. 2. 3. 4. 5. the factory default at 3. Display Information Exit -- Return to the previous Menu Exit – Exit the OSD screen 13 Rev.
Note: 1) No signal detected When the monitor is ON and there is no video signal received, the following message will be displayed No signal detected! 2) Signal out of range When the frequency range of the signal is out of the Monitor’s specifications, (over 75HZ) the display will show the following message Out of Range! 14 Rev.
Appendix A TFT LCD Monitor Specifications Item Specification LCD Panel 20.1" WSXGA+ Control Functions Power On-Screen Display (OSD) Software Power switch with LED indicator (ON/OFF) Main Menu Submenu Auto adjust Luminance Brightness/Contrast/ /Exit Geometry H.Position/V. Position/Pixel Clock/Phase/Exit Color Auto Color/9300K/6500K/5800K User Preset(R,G,B, gain value)/Exit Volume OSD OSD H. Position// OSD V.
Video Interface VGA Compatible Analog RGB DVI compatible signal Scanning Frequency H/V, Hz 31K-80K 60-75 Power Management Meets VESA DPMS Power Consumption (ON/OFF, W) 45W/1W Max. Dimensions WxHxD 18.72 x 16.14 x 6.89 in. (475.4 x 410 x 175mm) Net Weight (approx.) 16.256 lbs (6.4 Kg) Power Supply Environment Universal Input AC Socket Operating Temperature: 32 to 104°F (0 to 40° C) Relative Humidity: 10% to 90% Regulatory FCC B DoC,UL/cUL,Energy star 16 Rev.
Appendix B Supported PC Timing Item Standards Resolution Dot Clock (MHz) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 DOS DOS Macintosh VESA VESA VESA VESA VESA VESA VESA VESA VESA Macintosh VESA Macintosh SUN 66 SUN VESA IBM1 VESA VESA VESA 720x400 640x480 640x480 640x480 640x480 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024X768 1152X864 1152X870 1152x900 1152x900 1280X1024 1280X1024 1280X1024 1680X1050 1680x1050 28.32 25.18 30.24 31.50 31.50 40.00 50.00 49.50 57.28 65.
Supported Video mode Item Standards 1 2 3 4 5 720x480i 720x480P 1280x720P 1920x1080i 1920x1080P Vertical Scanning Frequency (Hz) 29.97 59.94 60 30 60 Horizontal Scanning Frequency (kHz) 15.73 31.46 45 33.75 67.5 18 Rev.
Appendix C Troubleshooting This LCD monitor comes pre-adjusted with standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display mode or new VGA card is selected. Before applying any of the following troubleshooting procedures, you should first apply the Auto Adjust option in the OSD menu.
PC’s VGA card may be out of the LCD’s synchronous range. Change to one of the alternate modes listed in Appendix B, or replace the VGA card and repeat steps 1 and 2. 4. If the power LED is not lit, check that the AC power connector is securely connected, and verify that the AC adapter LED is lit. If the AC adapter LED is not lit, please contact your dealer for assistance. PROBLEM: The LCD displays “signal out of range” error message 1.
