User Manual
Table Of Contents
- SAFETY INSTRUCTIONS
- SAFETY INSTRUCTIONS
- IMPORTANT INFORMATION
- IMPORTANT INFORMATION
- SAFETY INSTRUCTIONS
- Opening the Package
- Package Contents
- Installation
- Installing the Monitor Stand Assembly
- Removing the Stand for Wall Mounting
- Identifying Front and Rear Panel
- Connections
- On Screen Display (OSD) Menu
- Supported DisplayPort
- Supported HDMI Resolution
- Troubleshooting
- How do I clean the LED Monitor?
- Specification
- LIMITED PRODUCT WARRANTY
- Disclaimer, Trademarks, Icons & Copyright Information
- FCC Compliance Statement
- 19 -
www.SCEPTRE.com
SCEPTRE C30 Display User Manual
If You want to use Multi Window with your video card…
1. Make sure the power of the C30 LED MONITOR is turned off.
2. Obtain a DisplayPort cable and connect one end to the back of the
monitor and the other end to the back of the computer.
3. Obtain a HDMI cable and connect one end to the back of the monitor and
the other end to the back of the computer.
4. Turn on the power of both the C30 LED MONITOR and the computer.
5. From the monitor side, open the OSD by pressing the
button. Under
PICTURE, select and turn on Multi Window either by using PIP or PBP.
Change to the correct HDMI source (diagram above shows computer
connected to HDMI 1) for the secondary input.
6. From windows go to display settings and select extend display to show
the desktop on both inputs.