22 LED MONITOR WWW.SCEPTRE.COM WWW.SCEPTRE.
Important Information SCEPTRE E22 Page1
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that my cause undesired operation. Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
European Notice CE mark for Class B ITE (Following European standard EN55022/1998; EN61000-3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
Important Information Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
Tips and Safety Precautions This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be installed near the equipment and should be easily accessible. Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock. Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.
Table of Contents Important Information .................................................................................................................................1 FCC Compliance Statement ......................................................................................................................2 Important Information .................................................................................................................................4 Tips and Safety Precautions ...............
Dear SCEPTRE Customer, Congratulations on your new SCEPTRE E22 LED monitor purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor. For technical assistance, please call 1800-788-2878 and select option 3 or email our tech support group at SceptreTS@SCEPTRE.com.
Opening the Package The SCEPTRE E22 LED monitor is packaged in a carton together with standard accessories. The weight of the LED display is approximately 6.61 lbs. Since the LED panel can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on a protective padding. When opening the carton, make sure the product is in good condition and that all the standard accessories and items are included.
Setting Up Your Monitor The following are general short steps to setup and use the monitor with your PC under the Windows 7 operating system. 1. 2. 3. After you have installed the base, connect your VGA or DVI cord to both the monitor and PC and turn on the PC and the monitor. Under Windows, use your mouse to right click on the wallpaper and select the RESOLUTION option. Change your resolution to 1920x1080 and click on APPLY. For Microsoft Windows 8 1. 2. 3. 4.
Mounting Preparations 1. Place the monitor on a flat surface with cloth so the bezel does not get scratched. base where the two buckles are located. Look at the Pull / expand them outwards while pulling on the base and it will come off. 2. The monitor is ready for mounting. Unfortunately you cannot remove the neck piece. Please note : The mounting pattern of the monitor is 100mm x 100mm using M4 metric system screws. The screw depth of the mounting pattern should not exceed 7mm.
Identifying Front and Rear Panel Front View POWER INDICATOR - If light is blue, the monitor is turned on. If the light is blinking blue, the monitor is turned on but not receiving a signal from the computer. NATIVE RESOLUTION - This monitor’s clearest picture is produced under its native resolution. The native resolution of the monitor is 1920x1080 at 60 Hz refresh rate. MENU – Menu button brings up the on screen menu. When the on screen menu is being displayed the menu button functions as ENTER.
Connections HDMI – HDMI stands for High Definition Multimedia Interface. This connec tion is for A/V devices such as Blu-ray player, DVD player or game consoles such as Playstation®3. DVI – DVI stands for Digital Video Interface. This connection is for computers to send video signals to the monitor digitally so that colors and video are more accurate and vivid. VGA – VGA stands for Video Graphics Array. This connection is for computers to send video signals to the monitor by an analog signal.
Connecting the LED Monitor If You have DVI Connection on Your Video Card… 1. 2. 3. Make sure the power of E22 LED MONITOR is turned off. Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other end of the cable to your E22 LED MONITOR. Turn on the power of both the E22 LED MONITOR and the PC. Please Note: Page14 Some video cards may have their DVI connection turned off by default. If you do not get video, please consult your video card’s technical support.
If You have VGA Connection on Your Video Card… 1. 2. 3. 4. Make sure the power of E22 LED MONITOR is turned off. If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the E22 LED MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. After you have right clicked, select the PROPERTIES option. Click on the SETTINGS tab.
If You have HDMI Connection on Your Cable or Satellite Box… 1. Make sure the power of the E22 LED MONITOR is turned off. 2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the cable or satellite box. 3. Turn on the power of both the E22 LED MONITOR and the cable or satellite box. Please Note: Page16 Make sure to set audio output from your cable or satellite box to PCM output. Please refer to the cable or satellite company for more information.
On Screen Display (OSD) Menu The OSD menu of the monitor provides various adjustments for the monitor such as color, brightness, contrast, and volume…..etc. When you press the MENU button on the monitor, the OSD screen will appear. Select each of the functions with the UP or DOWN buttons. Use the MENU button again to enter each of the function or when you’re in the function already, use the MENU button to select the option you want to adjust. Use the UP or DOWN buttons to adjust each option’s values.
PICTURE SETTINGS This function adjusts the brightness and contrast of the LED Monitor. 1. 2. 3. 4. 5. To use this function, press MENU to open the OSD then highlight PICTURE SETTINGS function by pressing the UP or DOWN button. Press MENU again to enter the function. Press UP or DOWN button to select BRIGHTNESS or CONTRAST to adjust. Press MENU to select the option you want to adjust. Use the UP or DOWN button to adjust the values.
COLOR ADJUST This function adjusts the overall balance of white colors in a picture in large increments. Color temperature consists of COOL, NORMAL, WARM, and USER COLOR. 1. 2. 3. 4. 5. To use this function, press MENU to open the OSD then highlight COLOR ADJUST function by pressing the UP or DOWN button. Press MENU again to enter the function. Press UP or DOWN button to select the option you want. Press MENU to finalize your selection.
IMAGE This function adjusts the image of the monitor. 1. 2. 3. 4. Press MENU to open the OSD then highlight IMAGE by pressing the UP or DOWN buttons. Press MENU to enter the function. Press the UP or DOWN buttons to select the option you want to adjust and press MENU to enter the option. Use the UP or DOWN buttons to adjust the values. a. AUTO ADJUST – This option automatically adjusts the image for you. b. H. POSITION – This option adjusts the horizontal position of the image. c. V.
SIGNAL SOURCE This function selects the source of the monitor. 1. 2. 3. Press MENU to open the OSD then highlight SIGNAL SOURCE by pressing the UP or DOWN buttons. Press MENU to enter the function. Press the UP or DOWN buttons to select the source you want to change to.
OSD MENU This function allows you to change the language of the OSD and adjust the OSD options. 1. Press MENU to open the OSD then highlight SETUP MENU by pressing the UP or DOWN buttons. Press MENU to enter the function. Press the UP or DOWN buttons to select the option you want to change to and press MENU to begin adjusting the option a. LANGUAGE – This option selects various languages for the OSD. b. OSD H. POSITION – This option changes the horizontal position of the OSD. c. OSD V.
MISC. This function changes various miscellaneous options. 1. 2. 3. Press MENU to open the OSD then highlight MISC. by pressing the UP or DOWN buttons. Press MENU to enter the function. Press the UP or DOWN buttons to select the option you want to change to and press MENU to begin adjusting the option a. VOLUME – This option adjusts the volume of the speakers in the monitor. b. ALL RESET – This option resets all values in the OSD back to factory standard. c.
Supported PC Resolution RESOLUTION & REFRESH RATE 1920 x 1080 @ 60Hz 1600 x 1200 @ 60Hz 1280 x 720 @ 60Hz 800 x 600 @ 60Hz 640 x 480 @ 60Hz Supported Video Resolution VIDEO RESOLUTION 480p 720p 1080i 1080p *Once a mode is optimized, there is no need to make any further adjustment as long as the VGA card remains unchanged. **Specifications are subject to change without notice.
Troubleshooting Problem Possible solutions DISPLAY IS UNCLEAR AND UNSTABLE To stabilize and clarify your display, use the AUTO ADJUST function or change the resolution to the display’s optimal setting 1920 X 1080 at 60Hz, then AUTO ADJUST. Make sure you switched to the correct source. Check both sources to see video is on the other source. Check your video cable. It might be corrupt. Swap out the video cable for another one to see if the monitor will work. Check your power plug.
Problem I CANNOT GET THE RESOLUTION 1920x1080 Possible solutions If you are using DVI, please try out VGA to see if you are able to achieve that resolution. If your VGA can then, your video card’s DVI cannot support widescreen resolutions. Sometimes your video card will not read the monitor correctly and will not allow you to achieve the resolution you want. Rebooting your computer will solve the situation. You can also make sure your video card’s video drivers are up to date.
Problem Possible solutions THE WORDS ARE TOO SMALL AT 1920X1080 At the native resolution of 1920x1080, some people might feel that the words are too small to read. You can change the size of the words in Windows Operating System via its display properties. For Windows XP 1. Right click on the background with nothing selected. Left click on the PROPERTIES option. 2. Click on the SETTINGS tab. 3. Under SETTINGS, click on the ADVANCED button. 4.
How do I clean the LED Monitor? IMPORTANT 1. The power cable has to be removed from the socket before cleaning the monitor. 2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the monitor. These types of chemicals might damage the housing and the LCD glass. Cleaning the bezel 1. Use a 100% cotton cloth or micro-fiber cloth for cleaning. 2. If the bezel is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again.
Specification Display panel Active Area / Screen Size 22” (21.5” Diagonal corner to corner) Aspect Ratio Widescreen 16 : 9 Resolution Native: 1920x1080 Brightness 250 cd/m Contrast 1000:1 (NATIVE) Response Time 5ms (Gray to Gray) 2 5,000,000:1 (DCR) Typical 170/160 Degree Viewing Angle (Horizontal/Vertical) Colors 16.7M colors (RGB 6-bit+Hi_FRC) LED Backlight 30,000+ Hours Monitor Display With Stand: 20.04” x 7.17” x 14.69” Dimension Without Stand: 20.04” x 2.21” x 14.61” Weight 6.
Call Us If You Need Help! Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone or email. For more information on warranty services or repairs after the warranty period, please contact our support department at the number below. For technical help, contact our SCEPTRE Technical Support Group via email or phone.
LIMITED PRODUCT WARRANTY Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor and is only valid when purchased from an Authorized Reseller, only on new and non-refurbished product, and available to customers in the Continental US, Alaska, Hawaii and Puerto Rico. See below for the SCEPTRE Extended Service warranty.
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only warranty applicable; no one is authorized to extend or modify it or to grant any other warranty.
Disclaimer & Copyright Information Microsoft, Windows are registered trademarks of Microsoft Corporation in the United States and other countries. This HD monitor meets the ENERGY STAR® guidelines under the default picture setting called POWER SAVING. Changing this setting or enabling other options will increase power consumption which could possibly exceed the guidelines of ENERGY STAR®. For more information on the ENERGY STAR program, please refer to www.energystar.gov.
