User Manual

- 17 -
www.SCEPTRE.com
Sound Bar 2.1 User Manual
Troubleshooting
The following table contains the common problems and the solutions to these
problems. Please check this list before you contact the technicians.
Problems
Solutions
NO SOUND
 Try increasing the volume of the speaker.
 Check that the Sound Bar is not turned off.
 Check the Sound Bar volume level.
 Make sure the correct input is selected.
 Make sure the proper cables are connected.
 If you are using digital audio, make sure the source is
sending out a PCM signal. Some devices have
default settings on Bitstream.
REMOTE DOES
NOT WORK
 Make sure the battery is properly installed.
 Take the battery out, press the buttons once or twice,
install the batteries back in to see if it works.
 Maybe the battery is out of power, please replace the
battery.
NO POWER
 Make sure the AC power cord is securely connected
to a power outlet.
 Try another electrical device on the power outlet to
ensure there is power through it.
Speaker buzzing or
humming
 Make sure both ends of the audio cables are
connected properly.
 Test the sound bar with another audio cable.
 Test the sound bar with another TV.