Owner manual
- 6 -
Smart Sound Bar 2.1 User Manual
Package Contents
Smart Sound Bar x 1
User Manual x 1
Warranty x 1
Drywall Anchor with Screw x 2 Sets
3 Head RCA Audio Cable x 1
3.5 mm Mini-jack Cable x 1
Smart Sound Bar Remote Control with AAA Battery x 1
Overviews
Front & Back
1. WALL MOUNT BRACKETS – Use these brackets to hang the sound bar on a wall.
2. POWER CABLE – Connect this to a surge protector or wall outlet.
3. COAXIAL SPDIF – Connect your digital audio outputs to this connection for audio. If
you connected to this one, press SOURCE repeatedly until you see COAX on the
display.
4. AUX – Connect your analog audio output to this connection for audio. If you connected
to this one, press SOURCE repeatedly until you see AUX on the display.
5. LINE IN (3.5mm) – Connect the headphone out from any device to this connection for
audio. If you connected to this one, press SOURCE repeatedly until you see LINE on
the display.
6. HDMI – Connect this HDMI port to the TV to display features for Android™.
7. USB – This port connects to USB accessories supported by Android.
8. SD CARD READER – You can insert SD memory cards to this reader to read its
contents while under Android.
9. POWER – This button turns the Sound Bar on or off.
10. SOURCE – This button selects the sound connection between LINE (3.5 mm mini-jack),
COAX (digital), AUX (analog) and NET (Android).
11. SOUND MODE – This button selects all the sound modes (MOVIE, MUSIC, NEWS,
GAMES).
a. MOVIE – This sound mode is made for watching movies.
b. MUSIC – This sound mode is made for listening to music broadcasts.
c. NEWS – This sound mode is made for watching the news.
d. GAMES – This sound mode is made for games such as football, soccer,
basketball, and baseball.
e. USER – This sound mode is to be used when you are using the sound bar’s
features for Android.
12. VOL(–/+) – The (-) touch sensor decreases the volume and the (+) touch sensor
increases the volume.
13. DISPLAY – This screen displays the current status of the sound bar.