User's Manual

SCEPTRE X23 Page3
Tips and Safety Precautions
THIS PRODUCT HAS BEEN TESTED FOR COMPLIANCE WITH REGULATORY SAFETY
CERTIFICATIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged, the
following rules should be observed for the installation, use and maintenance of the product.
Read the following safety instructions before operating the display. Keep these instructions
in a safe place for future reference.
To avoid the risk of electric shock or component damage, switch off the power before
connecting other components to the X23 LCD MONITOR.
Unplug the power cord before cleaning the X23 LCD MONITOR. Do not use a liquid or
a spray cleaner for cleaning the product. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving the X23 LCD MONITOR from an area of low temperature to an area of
high temperature, condensation may form on the housing. Do not turn on the X23 LCD
MONITOR immediately after this to avoid causing fire, electric shock or component
damage.
Do not place the X23 LCD MONITOR on an unstable cart, stand, or table. If the X23
LCD MONITOR falls, it can injure a person and cause serious damage to the
appliance. Use only a cart or stand recommended by the manufacturer or sold with the
X23 LCD MONITOR.
Any heat source should maintain a distance of at least 5 feet away from the X23 LCD
MONITOR, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close
to anything that produces smoke or moisture. Operating the product close to smoke or
moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the bezel are provided for ventilation. To
ensure reliable operation of the X23 LCD MONITOR and to protect it from overheating,
be sure these openings are not blocked or covered. Do not place the X23 LCD
MONITOR in a bookcase or cabinet unless proper ventilation is provided.
It is not recommended to use the X23 LCD MONITOR in a portrait format (by rotating
90 degrees) under high temperature environment (25°C or higher), since this would
retard heat dissipation and would eventually damage the monitor.
Never push any object into the ventilation slots of the X23 LCD MONITOR. Do not
place any objects on the top of the Product. It could short circuit parts causing a fire or
electric shock. Never spill liquids on the X23 LCD MONITOR.
The X23 LCD MONITOR should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.
The power cable must be replaced when using different voltage from that specified in
the User Manual. For more information, contact your dealer.