Dear Sceptre Customer, Congratulations on your new SCEPTRE POWER BOOST purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your power bank, please read the manual carefully before using it, and keep the manual in a safe place for future references. We hope you enjoy your new multifunctional power bank. For technical assistance, please call 1800-788-2878 and select option 3 or email our tech support group at SceptreTS@sceptre.com.
Table of Contents IMPORTANT SAFETY INFORMATION ............................................... 3 WARNINGS.......................................................................................... 5 In the Package ..................................................................................... 6 Features ............................................................................................... 7 Multi-Recharging .........................................................................
IMPORTANT SAFETY INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Make sure the area around the multifunctional power bank is well ventilated. Never smoke or allow a spark or flame near the engine or batteries. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
WARNINGS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
In the Package Sceptre Power Boost Device x 1 Large Current Output Plastic Cover x 1 Car Jumper Cable x 1 (DC 15V, 2000mA) AC-DC Adapter x 1 20Amp Fuse x 1 (Installed) User’s Manual x 1 -6www.SCEPTRE.
Features Multi-Recharging The Sceptre Power Boost can be charged by the included power adapter, with the jumper cables, or with the not included cigarette plug. Multi-Functions Power Supply Large Current Output: For car emergence jump start. USB 5V Output: 1A + 2.1A for USB devices. (Max. 3A output) Cigarette Lighter Socket Output 12V/20A Output: Tire inflator, Vacuum cleaner etc. 6 Types for LED Lighting Effects Flashlight (3 mode) / Emergency Blinking Light (3 mode).
Introduction 1. 2. 3. 4. 5. LED Flashlight USB 5V Output (2100mA) 20A Fuse Large Current Output (connects to jumper cables) Reset Button (turns on power for large current output, cigarette lighter socket) 6. Power Level Indicator 7. Power Level Indicator Button 8. USB 5V Output (1000mA) 9. Cigarette Lighter Socket 10. Panel Cover 11. DC Input Jack (for recharging the powerbank) -8www.SCEPTRE.
12. Main Power Switch (hard power switch, you must switch this on before using anything on the powerbank including recharging the unit) 13. Flashlight Button -9www.SCEPTRE.
Operation Powering on the Sceptre Power Boost To reduce the device self-discharging, the main power switch is set at “Off” mode (O symbol is depressed). After turning on the main power switch, the system will start to detect the power level automatically and begin to supply power to the sockets. If the main power switch is left on, the power level of the unit will drop faster than switched off. Flashlight To use the flashlight, flip the main power switch to the on position.
USB 5V Ports Output To use the USB ports for charging, flip the main power switch to the on position and press the power level indicator button. Finally plug in any USB cable to your device that needs to be charged. Reset Button Besides the main power switch, the reset button acts as a secondary power on button for large current output (jump starting cars), and cigarette lighter socket.
Disconnect the jumper cable when you are finished using the unit. Do not keep them connected. Recharging Please use the included recharge adapter to recharge the unit. 1. Turn on the main power switch, and plug the adapter into the device DC Jack. 2. Plug the adapter to a wall socket (100~240VAC). 3. When you are done recharging, make sure to flip the main power switch to the off position in order to save power. 4.
Troubleshooting The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians. Problems Solutions The Sceptre Power Boost is beeping when I plug it in to recharge. You did not flip the main power switch to on (the | symbol) first. The unit needs to be on when recharging. I’m trying to jump my car but the Sceptre Power Boost is not working.
Call Us If You Need Help! Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone or email. For more information on warranty services or repairs after the warranty period, please contact our support department at the number below. For technical help, contact our Sceptre Technical Support Group via email or phone.
Specification SUBJECT CONTENT Model Name Capacity Working Voltage Max. Continuous Output 10 Second Output USB Output Cigar Socket Output AC-DC Adapter SS1000 4200 mAH 13.2V~14.2V 140A, Anderson Connecter 240A, Anderson Connecter 1000mA + 2100mA (max: 3000mA) < 20A (Limited by 20A Fuse) 100 – 240VAC, 50/60 Hz, 0.8A DC Input Jack: 15V/2A. (Max. Voltage/Current: 16.5V/2A) 14.7 V G - Flashing : >14.8V (Protection) RGY ON : 13.0V ~ 14.8V RY ON : 12.0V ~ 13.0V R ON : 11.5V ~ 12.0V R – Flashing : 11.0V ~ 11.
Sceptre Warranty Definition: The Distributor of Sceptre branded products warrants to you, the original purchaser of this new Sceptre-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
What does the warranty not cover? This warranty does not cover, customer instruction / education, installation, setup adjustments, cosmetic damage, damage due to wear and tear, corrosive connector plates due to neglect of maintenance, weather, lightning and other acts of God, such as power surges, accidental damage, misuse, abuse, negligence, commercial purposes / use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex, or oth
Disclaimer, Trademark, Copyright SCEPTRE is a trademark or registered trademark of Sceptre Group. Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, Sceptre, Inc. reserves the right to change product specifications without notice.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.