Owner's manual

SCEPTRE X32 HDTV User Manual
- 62 -
www.SCEPTRE.com
5. SETUP CODE – This subfunction sets the password.
a. Press MENU to open the OSD and highlight FUNCTION by
pressing the ▼ button.
b. Press ↵ or ► to select the functions and highlight AUTO LOCK.
c. Press ↵ to select the function.
d. Press ▼ until you see SETUP CODE and use ↵ to select it.
e. Input “0000” as your password and input your new password.
Please Note :
• There is no way of resetting the password.
• If you’re going to change the password, please write it
down and keep it in a safe place just in case you forget.