Brochure

ManualsBrandsSchaefer Brush ManualsHeating Equipment Brushes3/4" x 3" Natural Bristle Tube Brush (Total Length 9")

Page 43

1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187

Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927

Email brushes@schaeferbrush.com www.schaeferbrush.com



Schaefer Brush

Tube Brushes

Section 10

Twisted Wire Brushes

The small symbols represent a cross section of a twisted brush.

Single Spiral/Single Stem (2 wire)

Brush bristles are twisted between two stem

wires with a single wire on each side.

Double Spiral/Double Stem (4 wire)

Brush bristles are twisted between four stem wires with two layers of bristle. Each layer is perpendicular to the other

with a single stem wire in each quadrant.

Single Spiral/Double Stem (4 wire)

Brush bristles are twisted between four stem

wires with two stem wires on each side.

Speeds

Observe all speed restrictions indicated on brushes, containers, labels, or printed literature. “MSFS” means “Maximum Safe Free Speed” (RPM);

that is, spinning free with no work applied. For safety, never exceed “MSFS”. Consult our office or representative for maximum safe speeds

pertaining to your application, if not predetermined.

Guards

Keep all machine guards in place.

Short Handle Nylon & Bristle Tube Brushes

Nylon Tube Brushes

Single Spiral/Single Stem

Part #

Dia. X

Brush Part

Overall

Length

Fill

Dia. Pack

Pack

Weight

14504 1/4” x 2” 6-1/2” .010 12 0.7

14510 3/8” x 2” 6-1/2” .010 12 0.7

14517 1/2” x 3” 9” .012 12 0.9

14529 3/4” x 3” 9” .008 12 1.1

Natural Bristle Tube Brushes

Single Spiral/Single Stem

Part #

Dia. X

Brush Part

Overall

Length Pack

Pack

Weight

10209 1/4” x 2” 6-1/2” 12 0.8

10210 3/8” x 2” 6-1/2” 12 0.8

10220 3/8” x 2” 9” 12 0.9

10211 1/2” x 3” 9” 12 0.8

10221 1/2” x 3” 12” 12 1.1

10212 3/4” x 3” 9” 12 1.1

10214 3/4” x 3” 12” 12 1.2

10213 1” x 4” 12” 12 1.3

Custom brushes can be made to your specifications. Call for details!

Safety Equipment & Requirements

Safety goggles or face shields must be worn by operators and/or personnel in the working area of brushes.

Appropriate protective clothing and equipment must be used where a possibility of injury exists which could

be prevented by using such clothing or equipment.

Tube br

WHEN USING

BRUSHES WEAR

GOGGLES OR

FACE SHIELDS!

Summary of content (12 pages)

PAGE 1
Schaefer Brush Tube Brushes Section 10 Custom brushes can be made to your specifications. Call for details! Tube br Twisted Wire Brushes The small symbols represent a cross section of a twisted brush. Single Spiral/Single Stem (2 wire) Brush bristles are twisted between two stem wires with a single wire on each side. Single Spiral/Double Stem (4 wire) Brush bristles are twisted between four stem wires with two stem wires on each side.
PAGE 2
Long Handle Nylon & Bristle Tube Brushes Natural Bristle Tube Brushes Single Spiral/Single Stem Nylon Tube Brushes Single Spiral/Single Stem Part # Dia.
PAGE 3
Long Handle Wire Tube Brushes Stainless Steel or Brass Single Spiral/Single Stem Stainless Steel Double Spiral/Double Stem 3” brush part with long handle. 3” brush part with long handle, extra heavy handle, filled with medium stiff wire. ST/ST Part # Fill Dia. Brass Part # Fill Dia. Brush Dia. Overall Length Pack Pack Weight 14402 14404 14406 14408 14410 14412 14414 14416 14418 .005 .005 .006 .006 .007 .007 .007 .007 .007 14602 14604 14606 14608 14610 14612 14614 14616 14618 .005 .005 .006 .
PAGE 4
Adjustable Condenser Cleaners Stainless steel wire scrapers with 1/4”-28 female threads. Part # Size Pack Pack Weight 00691 00692 00693 00694 5/16” to 3/8” 3/8” to 1/2” 1/2” to 5/8” 5/8” to 1” 1 1 1 1 .06 .06 .12 .12 Condenser Fin Whisk Brush Plastic handle whisk for cleaning condenser fins and evaporators - A whisk with a hundred uses. Can be custom pad printed with your name & logo. Ask for details! Part # Brush Width Trim Overall Length Pack Pack Weight 02026 3” 2-1/8” 6-1/2” 24 1.
PAGE 5
Condenser Tube Brushes Nylon - Single Spiral/Single Stem Recommended for cleaning all tubes where deposits are light. 1/4” and 5/16” dia. brushes with female couplings have 8-32 threads (use accessories 13042 or 13044), while 3/8” through 1” dia. have 12-24 female threads (use accessories 13002 or 13003). 1/4”, 5/16”, and 3/8” dia. brushes with male couplings have 8-32 threads (use accessory 13042), while 7/16” through 1” dia. have 1/4”-28 male threads (use accessory 13010).
PAGE 6
Spin - Clean Brushes Single stem construction with silicon carbide impregnated nylon. Step trim brush allows better cleaning of enhanced condenser tubes. The long bristles are designed oversized with the intention of bending over, allowing the aggressive filament to come into maximum contact with the lands. The short bristles are able to get into the grooves. These brushes provide better cleaning and longer life than conventional brushes. 1/4”-28 thread (use accessory 13010).
PAGE 7
Miniature Brushes (Continued) Miniature and Micro-Miniature Brushes (continued) Single Spiral Miniature Brushes with a stainless steel stem and cut off ends for power or hand use. ST/ST Brass Nylon Brush Brush Overall Fill Part # Part # Part # Diameter Part Length Dia.
PAGE 8
Burr Brushes Heavy Duty Power Brushes - Single Spiral/Single Stem Used in drill presses and hand power tools for deburring, polishing, and cleaning inner bores of tubing, machined cylinders, flat stock, and smooth or threaded blind holes. Available in carbon steel, stainless steel, and brass. H/C Steel Part # ST/ST Part # Brass Part # Brush Diameter Brush Part Overall Length Fill Dia.
PAGE 9
Side Tuft Cleaning Brushes Single Spiral/Single Stem Used for cleaning and polishing threads, inner walls of tubes and cylinders. Solid concentration of bristles provide a high degree of bristle stiffness with little flexing of bristles during operation. For use in power tools. Available in high carbon steel, stainless steel and brass. H/C Steel Part # ST/ST Part # Brass Part # Brush Diameter Brush Part Overall Length Fill Dia.
PAGE 10
Abrasive Nylon Brushes Silicon Carbide - Single Spiral/Double Stem Used for wet or dry cleaning, polishing, blending, deburring inner walls of tubes, cross hole deburring and thread cleaning. Double stem construction used for added strength for power use or manual cleaning. Available in silicon carbide and aluminum oxide. Aluminum Oxide - Single Spiral/Double Stem Part # Brush Dia. Brush Part Overall Length Nylon/ Grit Pack Part # Brush Dia.
PAGE 11
Abrasive Nylon Brushes Silicon Carbide - Single Spiral/Single Stem Used for wet or dry cleaning, polishing, blending, deburring inner walls of tubes, cross hole deburring and thread cleaning. Single-spiral construction made with a continuous end. Available in silicon carbide and aluminum oxide. Brush Brush Overall Nylon/ Part # Dia. Part Length Grit Pack Aluminum Oxide - Single Spiral/Single Stem Part # Brush Dia. Brush Part Overall Length Nylon/ Grit Pack 1” 1” 1” 4” 5” 5” 5” .012/600 .012/600 .
PAGE 12
Schaefer Brush Twisted In Wire Brush Design Form Section 10-1 Name: ____________________________________________ Company: ___________________________________________________________ Address: __________________________________________________ City: ___________________ State: _______ Zip: ____________________ Phone: ____________________________ Fax: _________________________ Email: _______________________________________________ Date: __________________________________ K J B H G D M A E C Brush Applic