Product Manual

Unpack your Mobile Box Fan

• The unit is shipped fully assembled and strapped to a pallet. Inspect the unit and note any suspected damage when

accepting delivery.

• Remove the straps and lift the unit from the pallet.

Caution: This unit is very heavy. When removing this unit from the pallet manually, several people should assist to

avoid injury.

Inspect your Mobile Box Fan

• Visually inspect the unit for any damage that may have occurred during shipping.

• Contact your shipper immediately if any damage is found.

The unit is ready for operation

• Shut down the unit when it is no longer needed.

• Unplug the unit from the electrical outlet.

Setup and Operation

Maintenance

Note: The fan unit you have purchased is built with heavy duty components, designed to give you many years of

performance. Like anything else that is mechanical, your fan unit will require a small amount of periodic maintenance to

assure maximum efficiency.

Our fans utilize motors that have totally sealed bearings. Periodically remove dust and grime that has accumulated on the

motor, fan blade, and guard. Pressure washing the unit will void the warranty. Performing this small amount of

maintenance will keep your fan unit running as efficiently as when it was brand new.

Bi-annually

7000 hours

Annually

Clean motor, fan blade and guards.

• Disconnect power.

• Use an air hose to remove dust.

• Use a damp cloth to remove grime and grease.

• Pressure washing will void the warranty.

Grease the pillow block bearings.

• Use a grease gun and lithium-based / Shell #2 grease.

• Insert 4 grams into each grease zerk every 7000 hours

of run time.

• Do not overgrease.

Check belt tension (MOB36612-2 and MOB4861-2).

• Correct adjustment is 3/4" deflection at 10 lbs of force.

• Belt tension is adjusted automatically by the assembly.

Over time, the belt will become worn and the tensioner

will no longer be able to pull the belt tight enough. When

this happens, the belt will need to be replaced.

Please see page 6 for specific MOB42634-2 instructions.

Grease zerks

Belt tensioner assembly