User`s manual

16
Figure WC-1HP.08 - WayCool® Control Switch
The WayCool® WC-1HP control switch is mounted on the outside of one frame leg (see cover fig).
It has the following positions:
OFF - Power is off to the blower motor and the pump motor.
LOW VENT - The blower runs at low speed and the pump is OFF.
HIGH VENT - The blower runs at high speed and the pump is OFF. Use this setting to quickly dry
the cooling pads for removal and cleaning.
LOW COOL - The blower runs at low speed and the pump is on. Use this setting for low cooling
loads.
HIGH COOL - The blower runs at high speed and the pump is on. Use this setting for maximum
cooling.
PUMP ONLY - Pump is on and the blower is OFF. Use this setting during startup to first saturate
the cooling pads, then switch to LOW COOL or HIGH COOL to begin cooling.
CONTROLS