Operating instructions

www.schaerer.com Troubleshooting
BASCJ_EN
V01 | 02.2011
40
Troubleshooting
General troubleshooting procedure:
► Switch the coffee machine off and, after several seconds, on again.
 In most cases, the fault will be eliminated automatically.
► Repeat the steps that led to the fault.
If the fault occurs again:
► Find the fault in the following tables.
► Perform the described troubleshooting steps.
If the fault persists:
► Contact your service partner and describe the fault.
Faults with display message
Messages are displayed if intervention by a user or service technician is needed to ensure op-
erating readiness of the machine. There are two different causes for display messages:
•Note
•Fault
The following table describes display messages pertaining to faults as well as the steps need-
ed to eliminate these.
If a fault occurs that is not described in this chapter, please contact your service partner imme-
diately.
See "Operation" - "Display messages" for notes.
Display message Cause What to do
place brewer The brewing unit is not inserted. ► Insert the brewing unit.
Brewer position switch The brewing unit is not correctly insert-
ed.
► Check that the brewing unit is correctly seated.
The brewing unit is stiff. ► Remove the brewing unit.
 There are two nozzles with black sealing rings
on the inside of the machine.
► Grease the sealing rings with grease from the ac-
cessories.
► Put the brewing unit back in place.