Datasheet

ManualsBrandsSCHAFFNER ManualsHF & EMC ComponentsEMI filter 250 Vac 12 A 0.7 mH (W x H) 64 mm x 29.3 mm 1 pc(s)

Table Of Contents

DATASHEET

Single-Stage Filters FN2020

General Purpose AC/DC EMI Filter

Rated currents from 1 to 60 A

High differential-mode attenuation

Optional medical version (B type)

Optional safety version (A type)

Performance indicators

Technical specifications

Rated voltage*

250 VAC, 50/60 Hz; 250 VDC

Operating frequency

DC to 400 Hz

Rated currents

1 to 60 A @ 40°C max.

High potential test voltage

P –> PE 2000 VAC for 2 sec

P –> PE 2500 VAC for 2 sec (B types)

P –> N 760 VAC for 2 sec (1 to 20 A types)

P –> N 1100 VDC for 2 sec (30 and 60 A types)

Temperature range (operation and storage)

-25°C to +100°C (25/100/21)**

Certified to

UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 (applies to

AC and DC applications)

Flammability corresponding to

Terminal plastic for -06/-08 version: UL 94 V-0

Laces for -07 version: UL 94 VW-1

Grommet for -07 version: UL 94 V-0

Design corresponding to

UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939

Overvoltage category

II acc. IEC 60664-1

Pollution degree

2 acc. IEC 60664-1

Altitude

2000m (above derating applies)**

MTBF @ 40°C/230 V (Mil-HB-217F)

1,250,000 hours

1,750,000 hours (B types)

* maximum RMS operating voltage at rated frequency or the maximum DC operating voltage

** for dedicated requests exceeding this specification (e.g. -40 °C or higher altitude) please contact your local

Schaffner Sales office

Approvals & Compliances

Features and benefits

FN 2020 filters are designed for easy and fast chassis

mounting

FN 2020 B versions without capacitors to earth

comply to 1MOP for ME (medical equipment) acc.

IEC 60601-1

FN 2020 A versions with low capacitance to

earth for safety critical applications with necessity

for low leakage currents

All filters provide a general purpose conducted

attenuation performance, based on chokes with

high saturation resistance and excellent thermal

behavior

FN 2020 filters can be used to cover a broad range

of usage and they offer a good size/amperage ratio

FN 2020 filters are also available as two- stage filters

(FN 2060, FN 2070 series) for more noisy

environment

Various terminal options allow you to select the

desired connection style

Typical applications

Electrical and electronic equipment

Consumer goods

Household equipment

Medical equipment

Office automation equipment

Datacom equipment

Typical electrical schematic

Summary of content (7 pages)

PAGE 1
DATASHEET Single-Stage Filters FN2020 General Purpose AC/DC EMI Filter Rated currents from 1 to 60 A Approvals & Compliances High differential-mode attenuation Optional medical version (B type) Optional safety version (A type) Performance indicators Features and benefits FN 2020 filters are designed for easy and fast chassis mounting FN 2020 B versions without capacitors to earth comply to 1MOP for ME (medical equipment) acc.
PAGE 2
Schaffner Group EMC/EMI Products Datasheets 09 Dec 2021 Filter selection table Filter* Buy Rated current Leakage current** Power Loss Inductance*** @ 40°C (25°C) @ 250 VAC/50 Hz @25°C/DC L Capacitance*** Cx Cy Resistance*** Input/Output R connections Weight (@ 120 VAC/60 Hz) [A] [mA] [W] [mH] [μF] [nF] [kΩ] FN2020-1-.. 1 (1.15) 0.66 (0.38) 0.8 12 0.15 4.7 1000 -06 -07 FN2020-3-.. 3 (3.45) 0.66 (0.38) 1.2 2.5 0.15 4.7 1000 -06 -07 80 FN2020-6-.. 6 (6.
PAGE 3
Schaffner Group EMC/EMI Products Typical filter attenuation Per CISPR 17; CM=50 Ω/50 Ω sym; DM=50 Ω/50 Ω asym; 1 A: Standard type A type B type 3 A: Standard type A type B types 6 A: Standard type A type B types 10 A: Standard type A type B types 12 A: Standard type A type B types Datasheets 09 Dec 2021
PAGE 4
Schaffner Group EMC/EMI Products 16 A: Standard type A type B types 20 A: Standard type A type B types 30 A: Standard type A type B types 60 A: Standard type A type B types Datasheets 09 Dec 2021
PAGE 5
Schaffner Group EMC/EMI Products Datasheets Product selector Mechanical data Connection style -06, 1 to12 A types Connection style -06, 16 and 20 A types Connection style -07, 1 to 12 A types (same dimensions as style -06) Connection style -07, 16 A types (same dimensions as style -06) Connection style -08, 16 and 20 A types Connection style -08, 30 A types Connection style -24 B E Q H I G A F D J N K L M C 09 Dec 2021
PAGE 6
Schaffner Group EMC/EMI Products Datasheets 09 Dec 2021 Dimensions 1A 3A 6A 10 A 12 A 16 A 20 A 30 A 60 A Tolerances A 64 64 64 64 64 71 85 113.5 ±1 105 ±1 ±0.5 B 35 35 35 35 35 46.6 54 57.5 ±1 145.9 ±1 ±0.5 C 29.3 29.3 29.3 29.3 29.3 29.3 30.3 45.4 ±1 57.6 ±1 ±0.5 D 43.5 43.5 43.5 43.5 43.5 50.5 64.8 94 ±1 84.5 ±1 ±0.5 E 32.5 32.5 32.5 32.5 32.5 44.5 49.8 56 99.5 ±0.5 F 54 54 54 54 54 61 75 103 95 ±0.
PAGE 7
Schaffner Group EMC/EMI Products Datasheets 09 Dec 2021 Headquarters, global innovation and development Sales and application centers Switzerland Schaffner Group Industrie Nord Nordstrasse 11e 4542 Luterbach T +41 32 681 66 26 info@schaffner.com China Schaffner EMC Ltd. Shanghai T20-3 C, No 565 Chuangye Road, Pudong district 201201 Shanghai T +86 21 3813 9500 cschina@schaffner.com www.schaffner.com.