Datasheet

ManualsBrandsSCHAFFNER ManualsHF & EMC ComponentsMains filter + IEC socket 250 Vac 1 A (L x W) 48 mm x 22.5 mm 1 pc(s)

DATASHEET

IEC Inlet Filters FN 9244

Excellent Performance EMC/EMI Filter

Superior attenuation performance

Optional earth line choke

Complies with IEC/EN 60601-1

Snap-in versions (S and S1 type)

Hot inlet versions (HI type)

Performance indicators

Technical specifications

Maximum continuous operating voltage

250 VAC, 50/60 Hz

Operating frequency

DC to 400 Hz

Rated currents

1 to 15 A @ 50°C max.

Approvals by rated current

1 to 10 A (ENEC, CQC)

1 to 15 A (UL, CSA)

High potential test voltage

P –> PE 2000 VAC for 2 sec (standard types)

P –> PE 2500 VAC for 2 sec (B types)

P –> N 1000 VAC for 2 sec

Protection category

IP 40 according to IEC 60529

Temperature range (operation and storage)

-25°C to +85°C (25/85/21)

Design corresponding to

UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939

Flammability corresponding to

UL 94 V-2 or better

MTBF @ 40°C/230 V (Mil-HB-217F)

≤8 A: 2,035,000 hours

≤15 A: 1,035,000 hours

Approvals

(CQC except HI-types)

The FN 9244 IEC inlet filter combines an IEC inlet and

mains filter with superior filter attenuation in a small

form factor. Choosing the FN 9244 product line

brings you the rapid availability of a standard filter

associated with the necessary safety acceptances.

Standard IEC connector filters are a practical solution

helping you to pass EMI system approval in a short

time. A wide selection on amperage ratings, output

connections, mounting possibilities and filters for

medical applications are designed to offer you the

desired solution.

Features and benefits

Exceptional conducted attenuation performance,

based on chokes with high saturation resistance

and excellent thermal behavior

Rear/front or snap-in mounting

Standard or wide mounting flange

Optional medical versions (B type) comply with the

requirements of IEC/EN 60601-1 for creepage and

clearance, leakage current and high potential

testing

Optional earth line choke see FN 9244 E data sheet

Custom-specific versions are available on request

Typical applications

Portable electrical and electronic equipment

Small to medium-sized machines and household

equipment

Single-phase power supplies, switch-mode power

supplies

Test and measurement equipment

Medical devices (MDD)

In-vitro diagnostic medical devices (IVDD)

Rack mounting equipment

Typical electrical schematic

Summary of content (5 pages)

PAGE 1
DATASHEET IEC Inlet Filters FN 9244 Excellent Performance EMC/EMI Filter Superior attenuation performance Approvals Optional earth line choke Complies with IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) (CQC except HI-types) Performance indicators The FN 9244 IEC inlet filter combines an IEC inlet and mains filter with superior filter attenuation in a small form factor.
PAGE 2
Schaffner Group EMC/EMI Products Datasheets 2017 Filter selection table Filter Rated current Leakage current* Inductance Resistance Output @ 50°C (25°C) @ 250 VAC/50 Hz L Cx Capacitance Cy R connections [kΩ] Weight (@ 120 VAC/60 Hz) [A] [mA] [mH] [μF] [nF] FN 9244 x-1-06 1 (1.2) 0.31 (0.18) 59.53 0.1 2.2 -06 FN 9244 x-3-06 3 (3.5) 0.31 (0.18) 13.45 0.1 2.2 -06 38 FN 9244 x-6-06 6 (7.2) 0.31 (0.18) 4.1 0.1 2.2 -06 38 [g] 38 FN 9244 x-8-06 8 (10.6) 0.31 (0.
PAGE 3
Schaffner Group EMC/EMI Products Product selector For example: FN 9244 B-15-06, FN 9244 S1B-10-06-20, FN 9244 R-12-06HI, FN 9244 UB-8-06 Mechanical data FN 9244 FN 9244-HI FN 9244 S FN 9244 S1 Datasheets 2017
PAGE 4
Schaffner Group EMC/EMI Products FN 9244 U Datasheets 2017 Installation Panel cut out Dimensions FN 9244 FN 9244 U FN 92244 S FN 92244 S1 A 48 48 29.9 29.9 48 B 22.4 25 22.4 22.4 22.4 C 40 ±0.2 40 ±0.2 D 38.25 38.25 38.25 38.25 38.25 E 27.8 27.8 27.8 27.8 27.8 F 5.7 5.7 5.7 5.7 5.7 G 20.1 20.1 20.1 20.1 20.1 H Ø3.3 Ø3.3 14 14 14 14 I FN 9244-HI 40 ±0.2 Ø3.3 14 J 13.3 13.3 13.3 13.3 13.3 M R ≤3 R ≤3 R ≤1.5 R ≤1.5 R ≤3 N 21.5 21.
PAGE 5
Schaffner Group EMC/EMI Products Datasheets Headquarters, global innovation and development Sales and application centers Switzerland Schaffner Group Nordstrasse 11 4542 Luterbach T +41 32 681 66 26 info@schaffner.com http://www.schaffner.com China Schaffner EMC Ltd. Shanghai T20-3 C, No 565 Chuangye Road, Pudong district 201201 Shanghai T +86 21 3813 9500 cschina@schaffner.com http://www.schaffner.com.