Datasheet

ManualsBrandsSCHAFFNER ManualsHF & EMC ComponentsMains filter + IEC socket 250 Vac 1 A (L x W) 48 mm x 22.5 mm 1 pc(s)

Excellent Performance IEC Inlet Filter

Approvalsn Rated currents up to 15A

n Superior attenuation performance

n Optional medical versions (B type)

according to IEC/EN 60601-1

n Snap-in versions (S and S1 type)

n Hot inlet versions (HI type)

Typical applications

The FN 9244 IEC inlet filter combines an

IEC inlet and mains filter with superior

filter attenuation in a small form factor.

Choosing the FN 9244 product line brings

you the rapid availability of a standard

filter associated with the necessary safety

acceptances. Standard IEC connector

filters are a practical solution helping you

to pass EMI system approval in a short

time. A wide selection on amperage ratings,

output connections, mounting possibili-

ties and filters for medical applications are

designed to offer you the desired solution.

n Exceptional conducted attenuation

performance, based on chokes with high

saturation resistance and excellent thermal

behavior.

n Rear/front or snap-in mounting.

n Standard or wide mounting flange.

n Optional medical versions (B type) comply

with the requirements of IEC/EN 60601-1

for creepage and clearance, leakage

current and high potential testing.

n Optional earth line choke see FN 9244E

data sheet.

n Custom-specific versions are available on

request.

n Portable electrical and electronic

equipment

n Small to medium-sized machines and

household equipment

n Single-phase power supplies, switch-mode

power supplies

n Test and measurement equipment

n Medical devices (MDD)

n In-vitro diagnostic medical devices (IVDD)

n Rack mounting equipment

Features and benefits

Technical specifications

Maximum continuous operating voltage: 250VAC, 50/60Hz

Operating frequency: dc to 400Hz

Rated currents: 1 to 15A @ 50°C

Approvals by rated current: 1 to 10A (ENEC, CQC)

1 to 15A (UL, CSA)

High potential test voltage: P –> PE 2000VAC for 2 sec (standard types)

P –> PE 2500VAC for 2 sec (B types)

P –> N 1000VAC for 2 sec

Protection category: IP40 according to

IEC 60529

Temperature range (operation and storage): -25°C to +85°C (25/85/21)

Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939

Flammability corresponding to: UL 94V-2 or better

MTBF @ 40°C/230V (Mil-HB-217F): ≤8A: 2,035,000 hours

≤15A: 1,035,000 hours

Typical electrical schematic

Line

Cx R 2xL 2xCy

N‘

P‘

Load

IEC Inlet Filters

FN 9244

Summary of content (5 pages)

PAGE 1
IEC Inlet Filters FN 9244 Excellent Performance IEC Inlet Filter n n n n n Rated currents up to 15A Superior attenuation performance Optional medical versions (B type) according to IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) Technical specifications Maximum continuous operating voltage: Operating frequency: Rated currents: Approvals by rated current: High potential test voltage: Protection category: Temperature range (operation and storage): Design corresponding to: Fla
PAGE 2
> Components > FN 9244 Filter selection table Filter Rated current @ 50°C (25°C) Leakage current* @ 250VAC/50Hz Inductance L FN 9244x-1-06 FN 9244x-3-06 FN 9244x-6-06 FN 9244x-8-06 FN 9244x-10-06 FN 9244x-12-06 FN 9244x-15-06 FN 9244x-12-06HI FN 9244x-15-06HI [A] 1 (1.2) 3 (3.5) 6 (7.2) 8 (10.6) 10 (11.6) 12 (12) 15 (15) 12 (12) 15 (15) [µA] 373 373 373 373 373 373 373 373 373 [mH] 59.53 13.45 4.1 2.3 1.02 0.58 0.4 0.58 0.4 [µF] 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.
PAGE 3
> Components > FN 9244 Typical filter attenuation Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym 1 and 3A types 6 to 10A types 12 and 15A types Mechanical data FN 9244 FN 9244-HI B B IEC plug type C14 6.3 x 0.8 IEC plug type C16 A C E A C J E H F G 6.3 x 0.8 S S H I D J F G FN 9244S D I FN 9244S1 B B 6.3 x 0.8 A A J E G F D Installation B T C14 6.3 x 0.
PAGE 4
> Components > FN 9244 Dimensions FN 9244 FN 9244U FN 9244S FN 9244S1 FN 9244-HI A 48 51.85 29.9 29.9 48 B 22.5 25 22.4 22.4 22.5 C 40 ±0.2 40 ±0.2 40 ±0.2 D 38.4 38.25 38.4 38.4 38.4 E 27.8 27.8 27.8 27.8 27.8 F 5.5 5.5 5.5 5.5 5.5 G 20.1 20.1 20.1 20.1 20.1 H Ø3.3 Ø3.3 Ø3.3 I 14 14.1 14 14 14 J 13.3 13.3 13.3 13.3 13.3 M R≤3 R≤3 R ≤ 1.5 R ≤ 1.5 R≤3 N 21.5 21.5 20.8 21.9 21.5 P 28.5 28.5 29.4 28.5 28.5 R M3 M3 M3 S 90° 90° 90° T* 0.7 - 1.5 0.7 - 1.5 T* 1.5 - 2.2 1.5 - 2.
PAGE 5
Headquarters and global innovation and development center Schaffner Group Nordstrasse 11 4542 Luterbach Switzerland T +41 32 681 66 26 F +41 32 681 66 30 info@schaffner.ch www.schaffner.com Sales and application centers China Schaffner EMC Ltd. Shanghai Building 11, Lane 1365 East Kangqiao Road Shanghai 201319 T +86 21 6813 9855 F +86 21 6813 9811 cschina@schaffner.com www.schaffner.